Speaker Accessories

MartinLogan Color Kit for Voyage In-Wall Speaker (Silver)

Tue, 31 Mar 2009 17:18:26 -0600

Price=$55.00
Buy

QSC - FB2082-I -W

Tue, 31 Mar 2009 17:18:25 -0600

Price=$972.00
Buy

MartinLogan Paintable Color Kit for Passage In-Wall Speaker

Tue, 31 Mar 2009 17:18:24 -0600

Price=$55.00
Buy

SQUARE SPEAKER TERMINAL

Tue, 31 Mar 2009 17:18:23 -0600

Spring loaded, pushbutton terminals. Color coded for polarity identification. Accepts up to 12 gauge wire. Overall size 2-3/16" x 2-3/16"; cutout: 2" round. Includes gasket.
Price=$1.21
Buy

Speaker Wall Plate

Tue, 31 Mar 2009 17:18:22 -0600

Plug in. Rock out. This 2-terminal speaker wall plate has gold-plated binding posts and is a great way to hide speaker wire and ensure a clear connection. · 2-terminal speaker wall plate · Gold-plated binding posts · Fits most standard single-outlet electrical wall box · Hardware for installation includedWhat's in the box · 2-Terminal Speaker Wall Plate · Flat mounting brackets (2) · Formed mounting brackets (2) · Mounting bracket screws (4) · Short screws (2) · Owner's manual
Price=$15.99
Buy

QSC - AD-S32T-WH

Tue, 31 Mar 2009 17:18:21 -0600

Price=$133.00
Buy

Q-Logic Single Subwoofer Enclosure (QLH-1.2512SE) (QLH-1.2512SE)

Tue, 31 Mar 2009 17:18:20 -0600

Price=$49.99
Buy

MartinLogan Color Kit for Voyage In-Wall Speaker (White)

Tue, 31 Mar 2009 17:18:18 -0600

Price=$55.00
Buy

QSC - CP-212-2

Tue, 31 Mar 2009 17:18:18 -0600

Castor Pallet & Padded cover for transporting 2 x WL212sw or 2 GP212sw
Price=$900.00
Buy

Boston Acoustics Designer DSi455T2 - Speaker - 2-way

Tue, 31 Mar 2009 17:18:14 -0600

This two input in-ceiling speaker with its two tweeters and dual voice coil woofer, allows for the reproduction of both the left and the right channels of music from a single speaker location.
Price=$200.00
Buy

QSC - WL3082-WH

Tue, 31 Mar 2009 17:18:13 -0600

Price=$3349.00
Buy

Niles Audio 1-jack Wall Outlets for TV Cables Bone

Tue, 31 Mar 2009 17:18:12 -0600

dual (front and rear) female coaxial F-jacks * gold-plated jacks * fits standard single-gang junction box * bone finish * warranty: 10 years *
Price=$6.95
Buy

QSC - WL2082-I-W

Tue, 31 Mar 2009 17:18:11 -0600

Price=$2022.00
Buy

Sony CRU52SG12/R Colored Speaker Grille for Sony KDL-52XBR6 and KDL-52XBR7 Televisions (Red)

Tue, 31 Mar 2009 17:18:10 -0600

Price=$56.88
Buy

QSC - DSP-4

Tue, 31 Mar 2009 17:18:09 -0600

Price=$711.00
Buy

Niles Triple F-to-RCA Outlet White

Tue, 31 Mar 2009 17:18:08 -0600

three female F-type connectors (back), three gold-plated female RCA connectors (front) * open-backed single-gang J-box or plaster ring required for installation (not included) * white finish * warranty: 10 years *
Price=$15.99
Buy

GE TL96525 Decorator Phone Wall Jacks

Tue, 31 Mar 2009 17:18:07 -0600

Price=$7.97
Buy

QSC - BSC-7

Tue, 31 Mar 2009 17:18:07 -0600

For 4-channel CX and DCA models. Accomodates two embedded signal processor cards- one for channels 1 and 2, and the other for channels 3 and 4- and up to four XF-1 Input Isolation Transformers.
Price=$116.00
Buy

Scosche P150Mwf2I Mini Wafer Fuse (150 Amp)

Tue, 31 Mar 2009 17:18:03 -0600

SCOSCHE P150MWF2I Mini Wafer Fuse (150 amp) 150 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk; Mini Wafer Fuse (150 amp)
Price=$4.78
Buy

SPEAKERCRAFT ASM/PLS90243B Hook Upz Standard Connector Plates - 3 Position

Tue, 31 Mar 2009 17:18:03 -0600

SPEAKERCRAFT ASM/PLS90243B, HOOK UPZ STANDARD CONNECTOR PLATES -
Price=$12.99
Buy

Male In HDmi Wall Plate

Tue, 31 Mar 2009 17:18:02 -0600

dual (front and back) HDMI terminals * external female HDMI terminal angled 90° * internal pigtail with male HDMI terminal for easy connection to an HDMI cable extender * internal pigtail for easy hookup * HDMI version 1.3a *
Price=$19.98
Buy

6-PORT QUICKPORT FRAME - IVORY

Tue, 31 Mar 2009 17:18:01 -0600

Combine voice, data, audio and video connections in one compact, attractive Decora® wallplate. These QuickPort Decora® Wallplate Inserts offer designer style to match Leviton Decora electrical switches and outlets, with the capacity and flexibility to support high-tech communications for bedrooms to boardrooms.Use any of Levitons QuickPort snap-in modules to populate and configure the frames to your specific application. Each frame fit neatly into a single gang Decora® wallplate and can be combined with Decora® electrical devices (with a barrier box) in a multi-gang wallplate.
Price=$5.99
Buy

OEM Systems IWM-2P-I Decorator Style 2 Connector Plate (Ivory)

Tue, 31 Mar 2009 17:18:00 -0600

OEM SYSTEMS IWM-2P-I Decorator-Style 2-Connector Plate (Ivory) 2-connector plate; Ivory Decorator-Style 2-Connector Plate (Ivory)
Price=$5.37
Buy

MartinLogan Color Kit for Passage In-Wall Speaker (Silver)

Tue, 31 Mar 2009 17:17:58 -0600

Price=$55.00
Buy

MartinLogan Color Kit for Voyage In-Wall Speaker (Black)

Tue, 31 Mar 2009 17:17:57 -0600

Price=$55.00
Buy

Oem Systems Company IWM-3P Decorator Style 3 Connector Plate (White)

Tue, 31 Mar 2009 17:17:56 -0600

OEM SYSTEMS IWM-3P Decorator-Style 3-Connector Plate (White) 3-connector plate; White Decorator-Style 3-Connector Plate (White)
Price=$5.37
Buy

Dynamat Dynaxorb Eliminates back-wave noise and distortion Available in speaker or subwoofer kits Subwoofer kit, eight 6" x 6" sheets

Tue, 31 Mar 2009 17:17:54 -0600

Eight 6" x 6" sheets * 1/4" thick * advanced polymer squares
Price=$64.98
Buy

OEM Systems IW-1FGA F-Connector Jack Plate (Almond)

Tue, 31 Mar 2009 17:17:53 -0600

OEM Systems is a manufacturer of Architectural Audio Products and accessories for residential, commercial and institutional applications. The company's products are recommended by leading audio/video specialty retailers and commercial sound equipment suppliers.
Price=$7.99
Buy

Boston Acoustics NCB5 (Pair) New Contruction Brackets

Tue, 31 Mar 2009 17:17:48 -0600

bracket for DSi450, DSi250, and 351 (sold individually)
Price=$40.00
Buy

QSC - ADC-MRS

Tue, 31 Mar 2009 17:17:47 -0600

Price=$201.00
Buy

MartinLogan Color Kit for Passage In-Wall Speaker (White)

Tue, 31 Mar 2009 17:17:45 -0600

Price=$55.00
Buy

Oem Systems Company IWM-3P-I Decorator Style 3 Connector Plate (Ivory)

Tue, 31 Mar 2009 17:17:44 -0600

OEM SYSTEMS IWM-3P-I Decorator-Style 3-Connector Plate (Ivory) 3-connector plate; Ivory Decorator-Style 3-Connector Plate (Ivory)
Price=$5.37
Buy

Oem Systems IWM-2P-BN Decorator Style Blank Connector Plate (Brown)

Tue, 31 Mar 2009 17:17:43 -0600

OEM SYSTEMS IWM-2P-BN Decorator-Style 2-Connector Plate (Brown) 2-connector plate; Brown Decorator-Style 2-Connector Plate (Brown)
Price=$5.41
Buy

4-PORT QUICKPORT FRAME - IVORY

Tue, 31 Mar 2009 17:17:43 -0600

PRO-WIRE IWM-4P DECORATOR-STYLE 4-CONNECTOR PLATE (WHITE)

Tue, 31 Mar 2009 17:17:43 -0600

OEM SYSTEMS IWM-4P Decorator-Style 4-Connector Plate (White) 4-connector plate; White Decorator-Style 4-Connector Plate (White)
Price=$5.37
Buy

Chestnut Hill Sound CHS50001 George Grille Kit (Red)

Tue, 31 Mar 2009 17:17:42 -0600

Price=$16.23
Buy

Phoenix Gold Speaker Pins with Set Screw

Tue, 31 Mar 2009 17:17:40 -0600

Phoenix Gold A409 Crimp-On 12-16 Gauge Gold Plated Speaker Pins This item is the Phoenix Gold A409 Crimp-On 12-16 Gauge Gold Plated Speaker Pins 1 PAIR. This item is brand new and comes in new retail packaging. All of our Phoenix Gold products are purchased directly from Phoenix Gold and are guaranteed to be authentic and legitimate product. Phoenix Gold offers very high quality product for affordable prices. Professional installers and audiophiles everywhere know the high quality you get with Phoenix Gold Products. Now you can enjoy the same quality without paying high retail prices!! Phoenix Gold and their sister companies, AudioSource and Carver are used by professional home theater system designers and high end car audio installers all over the world. The A409 12 to 16 Gauge Speaker Pins (2 Pairs) from Phoenix Gold is a set of (2) pairs of speaker pins. Each pin features a 12-gauge pin on one side and a 16-gauge pin on the other side. The pins have boots and gold-plated connectors with set screws. Sold in pairs Gold-plated Accepts 12-16 gauge speaker cableSet screw termination
Price=$12.99
Buy

Cerwin Vega Pro Ab-36B 18-Inch Afterburner Folded Horn Bass System

Tue, 31 Mar 2009 17:17:39 -0600

CERWIN VEGA PRO AB-36B 18" AFTERBURNER FOLDED HORN BASS SYSTEM 18" WOOFER WITH 4" VOICE COIL; FREQ. RESP: 30 HZ300 HZ; PEAK POWER HANDLING: 1500W; PROGRAM POWER HANDLING: 750W; MAX SPL: 140 DB; NOMINAL IMPEDANCE: 8_; SENSITIVITY (1W/1M): 108 DB; SUGGESTED CROSSOVER FREQUENCY: 60HZ160HZ LOW PASS; CONNECTIONS: 1/4" PHONE, NEUTRIK SPEAKON; DURABLE MULTI-PLY CONSTRUCTION; HIGH QUALITY BLACK CARPET FOR DURABILITY
Price=$1237.46
Buy

Bass 12in 3 Hole Woofer Box

Tue, 31 Mar 2009 17:17:22 -0600

Q POWER B123H Bass 12in 3 Hole Woofer Box
Price=$89.97
Buy

Oem Systems Company IWM-2P Decorator Style 2 Connector Plate (White)

Tue, 31 Mar 2009 17:17:21 -0600

OEM SYSTEMS IWM-2P Decorator-Style 2-Connector Plate (White) 2-connector plate; White Decorator-Style 2-Connector Plate (White)
Price=$5.23
Buy

Scosche P30Mwf2I Mini Wafer Fuse (30 Amp)

Tue, 31 Mar 2009 17:17:21 -0600

SCOSCHE P30MWF2I Mini Wafer Fuse (30 amp) 30 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk;; Mini Wafer Fuse (30 amp)
Price=$4.54
Buy

Selenium 3V1K2-7K/650 3-Way Passive Crossover with Dish

Tue, 31 Mar 2009 17:17:19 -0600

Selenium's passive crossover networks are carefully designed and constructed to bring out the best performance in Selenium loudspeaker systems. Their expertly engineered Linkwitz-Riley filters and high power handling capability will also provide great results when used with other high quality speaker brands.
Price=$89.00
Buy

Sony CRU40SG12/N Colored Speaker Grille for Sony KDL-40XBR6 Televisions (Gold)

Tue, 31 Mar 2009 17:17:19 -0600

Price=$56.88
Buy

Mtx 2x12 Inch 2 Way PA Cabinet

Tue, 31 Mar 2009 17:17:18 -0600

Price=$348.72
Buy

Sony CRU46SG11/N Colored Speaker Grille for Sony KDL-46XBR8 Televisions (Gold)

Tue, 31 Mar 2009 17:17:18 -0600

Price=$73.94
Buy

QSC - AD-S282HT-WH

Tue, 31 Mar 2009 17:17:17 -0600

Price=$873.00
Buy

GE TL96172 Phone & Video Jack Wall Plate (Ivory)

Tue, 31 Mar 2009 17:17:15 -0600

Price=$9.97
Buy

Sony CRU46SG12/R Colored Speaker Grille for Sony KDL-46XBR6 Televisions (Red)

Tue, 31 Mar 2009 17:17:15 -0600

Price=$81.44
Buy

Oem Systems Company IWM-6P-BN Decorator Style 6 Connector Plate (Brown)

Tue, 31 Mar 2009 17:17:02 -0600

OEM SYSTEMS IWM-6P-BN Decorator-Style 6-Connector Plate (Brown) 6-connector plate; Brown Decorator-Style 6-Connector Plate (Brown)
Price=$1.43
Buy

Concertone SW-GRILL3 Speaker Grill

Tue, 31 Mar 2009 17:17:01 -0600

The Concertone SW-Grill3 is a large white plastic grill used to cover the SW-BOX4 subwoofer box. It is fastened using the 8 mounting holes.
Price=$9.94
Buy

GE TL96105 3-Jack Wall Phone Mount

Tue, 31 Mar 2009 17:17:00 -0600

Price=$0.01
Buy

Sony CRU46SG11/S Colored Speaker Grille for Sony KDL-46XBR8 Televisions (Silver)

Tue, 31 Mar 2009 17:17:00 -0600

Price=$73.94
Buy

OEM Systems IWM-3P-BN Decorator Style 3 Connector Plate (Brown)

Tue, 31 Mar 2009 17:17:00 -0600

OEM SYSTEMS IWM-3P-BN Decorator-Style 3-Connector Plate (Brown) 3-connector plate; Brown Decorator-Style 3-Connector Plate (Brown)
Price=$1.43
Buy

QSC - ADC-MR

Tue, 31 Mar 2009 17:16:59 -0600

Price=$148.00
Buy

MartinLogan Color Kit for Ticket In-Wall Speaker (Black)

Tue, 31 Mar 2009 17:16:57 -0600

Price=$55.00
Buy

Gefen HDMI Right Angle Wallplate

Tue, 31 Mar 2009 17:16:56 -0600

HDMI Right Angle Wallplate
Price=$29.99
Buy

Sony CRU40SG11/R Colored Speaker Grille for Sony KDL-40XBR7 Televisions (Red)

Tue, 31 Mar 2009 17:16:56 -0600

Price=$73.94
Buy

Cables To Go 42062 Dual Stereo Audio Wall Plate (Blue)

Tue, 31 Mar 2009 17:16:55 -0600

Rapid Run modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With Rapid Run, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!Rapid Run?s revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality.
Price=$25.95
Buy

Scosche P60Mwf2I Mini Wafer Fuse (60 Amp)

Tue, 31 Mar 2009 17:16:41 -0600

SCOSCHE P60MWF2I Mini Wafer Fuse (60 amp) 60 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk; Mini Wafer Fuse (60 amp)
Price=$4.54
Buy

MartinLogan Color Kit for Passage In-Wall Speaker (Black)

Tue, 31 Mar 2009 17:16:39 -0600

Price=$55.00
Buy

VANCO 120900X Single HDMI Passive Couple Wall Plate - Polybag (Ivory)

Tue, 31 Mar 2009 17:16:38 -0600

* Allows a Quick and Easy HDMITM Wall Plate Connection * Delivers Clean, Uncompressed Digital Signals * Supports High Definition Resolutions 1080p, 1080i, 720p and Standard Video Format * Supports Computer Resolutions UXGA (1600x1200), SXGA (1280x1024), XGA (1024x768), SVGA (800x600), VGA (640x480) * Supports HDMITM Audio and Video * Slim Compact Housing offers Easy Professional Installation * Ideal for Wall Mounted Flat Panel TVs and LCD/Plasma HDTVs * Fits on a Single Gang J-Box or Low Voltage Mounting Bracket * Includes a Trim Plate and Color Matching Mounting Screws * White ColorSpecifications: * HDMI Female Jack (19 Pin) to HDMI Female Jack (19 Pin) * Gold Plated * Ultra Slim Style
Price=$34.95
Buy

SpeakerCraft NEAT! 8 Speaker Installation Bracket (Pair)

Tue, 31 Mar 2009 17:16:37 -0600

If you are planning to purchase or install SpeakerCraft NEAT! 8 Two, Three or Five series speakers, each sold separately, the SpeakerCraft NEAT! 8 Speaker Installation Bracket is required. Whether it is for new construction or as a retrofit this required bracket is ready for installation in any 5/8" drywall application. This bracket perfectly compliments the NEAT! 8 line of speakers to produce a professional in-ceiling speaker setup with no external flange. The NEAT! line of products is ideal for the person who wants a powerful blend of an aesthetically pleasing appearance and high quality audio.
Price=$75.00
Buy

3.5" Nickel Dj Speaker Super Horn

Tue, 31 Mar 2009 17:16:36 -0600

Price=$2.22
Buy

NILES AUDIO HDL-4

Tue, 31 Mar 2009 17:16:36 -0600

Price=$95.00
Buy

QSC - AD-YM5-WH

Tue, 31 Mar 2009 17:16:35 -0600

Price=$20.00
Buy

Sony CRU46SG12/N Colored Speaker Grille for Sony KDL-46XBR6 Televisions (Gold)

Tue, 31 Mar 2009 17:16:35 -0600

Price=$56.88
Buy

22-GAUGE 2 Conductor

Tue, 31 Mar 2009 17:16:34 -0600

PVC Jacketed

CL2 rated

Sequential foot markings for ease of installation

1000' pull box
Price=$102.32
Buy

Sony CRU40SG11/S Colored Speaker Grille for Sony KDL-40XBR7 Televisions (Silver)

Tue, 31 Mar 2009 17:16:20 -0600

Price=$73.94
Buy

QSC - PL340

Tue, 31 Mar 2009 17:16:19 -0600

Price=$2278.00
Buy

Oem Systems Company IWM-8P-BN Decorator Style 8 Connector Plate (Brown)

Tue, 31 Mar 2009 17:16:18 -0600

OEM SYSTEMS IWM-8P-BN Decorator-Style 8-Connector Plate (Brown) 8-connector plate; Brown Decorator-Style 8-Connector Plate (Brown)
Price=$2.79
Buy

Niles MB-2 Mounting frame for 5W-24C

Tue, 31 Mar 2009 17:16:17 -0600

designed for use with one or two 5W-24Cs * blank half-frame insert * 8"W x 10-1/2"H x 1-1/4"D cutout * white finish * warranty: 10 years (limited) *
Price=$35.99
Buy

Sony CRU40SG11/N Colored Speaker Grille for Sony KDL-40XBR7 Televisions (Gold)

Tue, 31 Mar 2009 17:16:17 -0600

Price=$73.94
Buy

QSC - BSC-3

Tue, 31 Mar 2009 17:16:16 -0600

Accommodates one signal processor (crossover, limiter or EQ) for PLX, CX and DCA amplifiers. XF-1 input transformers may also be added. (Not compatible with PLX2 models)
Price=$56.00
Buy

Chestnut Hill Sound CHS30002 George Natural Walnut Upgrade Kit

Tue, 31 Mar 2009 17:16:15 -0600

Chestnut Hill George Audio Ipod Dock Sound System Natural Grilles Walnut Brown Upgrade Kit - Chestnut Hill CHS30004
Price=$99.00
Buy

Eminence PX:250 Low Pass Crossover 250 Hz

Tue, 31 Mar 2009 17:16:14 -0600

Eminence px cabinet-ready crossovers feature advanced circuit design to both preserve the crossover and your HF drivers. A common crossover problem is L-pad failure brought about by winding burnout when maximum attenuation is prolonged. Full attenuation concentrates the maximum voltage drop in a small winding area - a potentially damaging state even with high-power L-pad devices. In px crossovers, current is limited when the high frequency level control is set to '0' on its scale (±9 dB attenuation). A secondary benefit of the design is to form a voltage divider across the high frequency driver. The high-pass protection uses custom-built aerospace lamps. The tungsten filaments effectively track the program material, dynamically maintaining a safe maximum current level to the high frequency driver without introducing distortion. This circuitry provides smooth 3:1 analog compression during input overload conditions over 250 watts RMS. At full drive level approaching clipping, the electrical attenuation to the protected high frequency driver is -4.5 dB. In every way, Eminence px crossovers are a technically superior product. For use with 8 ohm drivers.
Price=$99.99
Buy

Oem Systems IWM-1P-A Decorator Style Blank Connector Plate (Almond)

Tue, 31 Mar 2009 17:16:13 -0600

OEM SYSTEMS IWM-1P-A Decorator-Style 1-Connector Plate (Almond) 1-connector plate; Almond Decorator-Style 1-Connector Plate (Almond)
Price=$1.43
Buy

Niles® Audio 2-post Wall Outlets for Speaker Wires Almond

Tue, 31 Mar 2009 17:16:12 -0600

2 dual (front and rear) 5-way binding posts
Price=$15.99
Buy

Oem Systems Company IWM-6P 6 Connector Decorator Style Connector Plate (White)

Tue, 31 Mar 2009 17:15:56 -0600

OEM SYSTEMS IWM-6P Decorator-Style 6-Connector Plate (White) 6-connector plate; White Decorator-Style 6-Connector Plate (White)
Price=$5.23
Buy

QSC - ADC-NC4

Tue, 31 Mar 2009 17:15:56 -0600

Price=$95.00
Buy

Scosche P125Mwf2I Mini Wafer Fuse (125 Amp)

Tue, 31 Mar 2009 17:15:56 -0600

SCOSCHE P125MWF2I Mini Wafer Fuse (125 amp) 125 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk; Mini Wafer Fuse (125 amp)
Price=$4.70
Buy

QSC - CP212-1

Tue, 31 Mar 2009 17:15:55 -0600

Castor Pallet & Padded cover for transporting 1 x WL212sw or GP212sw
Price=$800.00
Buy

OEM Systems IWM-2P-G Decorator Style 2 Connector Plate (Gray)

Tue, 31 Mar 2009 17:15:54 -0600

OEM SYSTEMS IWM-2P-G Decorator-Style 2-Connector Plate (Gray) 2-connector plate; Gray Decorator-Style 2-Connector Plate (Gray)
Price=$5.37
Buy

Sony SSNL1/C Optional Grill for the TAV-L1, Grey

Tue, 31 Mar 2009 17:15:52 -0600

Price=$129.99
Buy

Lenovo TL96520 3-Jack 6-Conductor Wall Phone Mount (White)

Tue, 31 Mar 2009 17:15:51 -0600

Price=$9.97
Buy

SpeakerCraft NEAT! 7 Two In-Ceiling Speaker (Each)

Tue, 31 Mar 2009 17:15:50 -0600

For the ultimate in-ceiling speaker appearance and performance, SpeakerCraft has developed the No Edge Audio technology (NEAT) line of products that offer a clean flangeless appearance while still offering the award winning pivoting AIM technology. The SpeakerCraft NEAT! 7 Two In-Ceiling Speaker has no external flange which means the grill material will cover the baffle and drivers and leave no additional edge between the speaker and the wall surface. This true flush mount design offers the cleanest and most professional in-ceiling installation possible. Keeping sound quality in mind as well, the built-in AIM technology lets you experience optimal audiophile-quality sound from anywhere in the room as the woofer and tweeter easily pivot toward the listening area. So regardless of the speaker's placement with respect to your home theater system, it is flexible enough to focus sound wherever the layout or architecture of a room may require. You can further adjust the sound settings of this speaker with a conveniently placed front-mounted treble switch. This speaker is ideal for the person who wants a powerful blend of an aesthetically pleasing appearance and high quality audio.Important Note: For proper installation, it will also be necessary to install the NEAT! Installation bracket, sold separately.SpeakerCraft products are sold to U.S. addresses only
Price=$199.00
Buy

BIC AMERICA V-80 8" 100 Watt Powered Subwoofer

Tue, 31 Mar 2009 17:15:49 -0600

The V-80 offers surprisingly deep, robust bass from an 11" cabinet! Its 100-watt amp is equalized at low frequencies, enabling the 8" woofer to deliver amazing low bass output for its size. The amp volume control and adjustable crossover allow you to match the V-80 to any speakers. It also features automatic on/off signal-sensing circuitry and high/low level inputs.
Price=$173.12
Buy

Oem Systems Company IW-2RG RCA Jack Plate (White)

Tue, 31 Mar 2009 17:15:49 -0600

OEM Systems Company is a manufacturer of Architectural Audio Products and accessories for residential, commercial and institutional applications. The company's products are recommended by leading audio/video specialty retailers and commercial sound equipment suppliers.
Price=$12.95
Buy

On-Q/Legrand 4 Port AnyPort Decorator Outlet, White

Tue, 31 Mar 2009 17:15:35 -0600

The non-flexing design of the On-Q AnyPort Decorator Outlet provides security when plugging and unplugging cables. Steel threaded inserts with recessed hex design to reduce spin for faceplate mounting and east leveling to compensate for off-center boxes
Price=$2.29
Buy

On-Q Single-Gang Wall Plate (Black) 6-Port

Tue, 31 Mar 2009 17:15:35 -0600

Smooth, polished look fits any decor and matches wiring device wall plates. Ideal for any installation where appearance is especially important. And a perfect match for Keystone jacks.
Price=$2.49
Buy

Dayton VL218-RM Red Maple Vinyl Laminate 2 ft. x 18 ft.

Tue, 31 Mar 2009 17:15:34 -0600

Tired of boring raw MDF speakers? No matter how good they sound, if they don't look good no one will appreciate them but you. Applying this high-quality vinyl wrap is a cost and time-effective way to achieve professional-looking results. Available in 7 different colors and finishes, with a peel-and-stick pressure sensitive adhesive on the back. No expensive tools are necessary for application- scissors, a razor knife, and a straight edge are all that is needed. Sold in rolls containing 2 ft. by 18 ft. of material. 10 mil thick.
Price=$27.99
Buy

AudioQuest HDMI M1 HDMI wall plate

Tue, 31 Mar 2009 17:15:33 -0600

1 front female HDMI jack * 1 rear female HDMI jack * HDMI version 1.3a * open-backed single-gang J-box recommended for installation (not included) * white Decora insert, white outer plate, and mounting screws included for installation *
Price=$27.99
Buy

Tang Band W2-1625S 2" Neodymium Subwoofer

Tue, 31 Mar 2009 17:15:33 -0600

Tang Band's unique W2-1625S driver features an innovative cone structure, Santoprene surround, injection-molded chassis, and neodymium magnet. The 1-1/4" voice coil ensures high power handling. Great for compact A/V, multimedia, or multi-driver hifi use. Specifications: Power handling: 20 watts RMS/40 watts max *VCdia: 1-1/4" *Impedance: 8 ohms *Re: 6.5 ohms *Frequency range: 90-1,000 Hz *Fs: 90 Hz *SPL: 81 dB 1W/1m *Vas: 0.0088 cu. ft. *Qms: 6.95 *Qes: .32 *Qts: .31 *Xmax: 2 mm *Dimensions: A: 2.28", B: 2.08", C: 1.34".
Price=$25.99
Buy

Dayton PT4-OF 4" Outside Flare

Tue, 31 Mar 2009 17:15:33 -0600

Dayton Create-Your-Own Flared Port Tube System Ports are an integral part of any loudspeaker system, so why skimp where it counts? Dayton Loudspeaker has developed the first a la' Carte port tube system that allows you to buy the parts you need to get the tuning you want. A selection of flares, elbows, and straight tubes allows you to create a port that will fit in any cabinet. Constructed from very high quality ABS plastic, the aesthetics of these ports is heads-and-shoulders above similar products. 4" diameter outside flare with mounting holes
Price=$10.99
Buy

#8-32 Hurricane Nuts 50 Pcs.

Tue, 31 Mar 2009 17:15:32 -0600

One-of-a-kind blind nut that offers extremely simple installation and outstanding holding power. The unique fluted design of the Hurricane nut allows it to be inserted simply with a hammer or by pulling in with a screw. Unlike conventional T-nuts, the Hurricane nut goes into wood easily without the pressures that it may take to get conventional teeth fully seated. But don't let the small flutes fool you, these nuts can hold at torques that you simply cannot imagine. You have to see the performance for yourself to believe their effectiveness! Once you use a Hurricane nut, you will never go back to an ordinary T-nut. Recommended hole size is 13/64".
Price=$9.94
Buy

Dayton PT4-ST 4" x 15.75" Straight Tube

Tue, 31 Mar 2009 17:15:32 -0600

On-Q Single-Gang Wall Plate (Black) 1-Port

Tue, 31 Mar 2009 17:15:32 -0600

Leviton 40782-RRW QuickPort Compression RCA Connector, Red Insert, White

Tue, 31 Mar 2009 17:15:31 -0600

Leviton's QuickPort Compression RCA Connector is used in home and office high-end applications such as HDTV, cameras, component video, CATV and satellite signal delivery. It features a radial compression design, providing a secure termination on Series 6 Quad Shield Cable. The connector is compatible with Leviton's QuickPort product line and provides a timesaving solution by directly terminating to wallplate connectors. Eliminating the need for an inside-wall connection, the QuickPort Compression Connector is ideal for easy installations and achieving consistent terminations that hold true. The QuickPort Compression RCA Connector's radial-compression design provides 360° electrical continuity, ensuring a more secure termination over traditional hex crimp designs.
Price=$4.95
Buy

Leviton 40850-BA QuickPort Decora Wall Plate Insert, Blank, Grey

Tue, 31 Mar 2009 17:15:17 -0600

FILL IN DECORA SINGLE GANG WALLPLATES: The Leviton Decora Single Gang Wallplate provides a way to fill-in a Decora opening in single or multi-gang wallplates. This insert is compatible with the complete collection of Decora wallplates.
Price=$3.95
Buy

Cerwin Vega Pro CVPOLE-1A Adjustable Telescoping Speaker Pole

Tue, 31 Mar 2009 17:15:16 -0600

CERWIN VEGA PRO CVPOLE-1A ADJUSTABLE TELESCOPING SPEAKER POLE MODEL NO. CVPOLE-1A; REINFORCED STEEL TELESCOPING SPEAKER SUPPORT POLE ; INCLUDES TWIST LOCK and SECURE LOCKING-PIN FOR HEIGHT ADJUSTMENT; DESIGNED TO BE USED WITH CVA ACTIVE/PASSIVE SERIES; FOR USE WITH CEPCVANT2A and CEPCVANT3A MOUNT ACCESSORY KITS; COMPATIBLE WITH INDUSTRY STANDARD 35MM POLE CUPS; HOLDS UP TO 150LBS
Price=$49.00
Buy

Pair of Jack Plates with Dual Speakon and Dual 1/4" PA/DJ Speaker Cabinet

Tue, 31 Mar 2009 17:15:14 -0600

This listing is for a set of two dual speakon with dual 1/4" Jack Plates. You will receive 2 Jack Plates pictured and described above.

Price=$39.99
Buy

On-Q Single-Gang Wall Plate (Black) 2-Port

Tue, 31 Mar 2009 17:15:13 -0600

Penn-Elcom L905/915Z Butterfly Latch Zinc

Tue, 31 Mar 2009 17:15:13 -0600

Superb quality butterfly latch for a variety of cabinet applications. A universal backplate is available for added strength and durability. Manufactured by Penn Fabrication in the UK. * Construction: 1.2mm/.047" steel * Description: Butterfly latch in split plain dish * Dimensions: 4" x 4.125" * Color: Zinc * Mfg. #L905/915Z.
Price=$6.64
Buy

Performance Teknique ICBM-893 - Amplifier - 4-channel

Tue, 31 Mar 2009 17:15:12 -0600

Performance Teknique keeps its pride in today's mobile entertainment world by continuing to introduce new products that feature the latest multimedia technology to offer more in-car listening and viewing pleasure than ever imaginable. Performance Teknique's products endure rigorous testing and challenge, so that you can be assured that it is designed and built to provide you with years of enjoyment. At Performance Teknique there is no limits to human imagination. That is why Performance Teknique creates car audio products that help your mobile entertainment reach their full potential. It's not a purpose. It's the passion.PRODUCT FEATURES:Wired bass remoted control;RCA line output;Double sided PCB;High & low level input;Two-way protection;Tri-Mode speaker connection stable;2-Ohm stable stereo;Soft Delayed Power-On.
Price=$269.00
Buy

On-Q/Legrand AnyPort Self-Terminating "F" Insert, White

Tue, 31 Mar 2009 17:15:11 -0600

This high quality AnyPort Keyed Insert is for use in all AnyPort Wall Plates. Self-terminating for easy installation. Use for all your coaxial cable connections.
Price=$5.21
Buy

Dayton SWC-2 2.0 ft³ Subwoofer Cabinet

Tue, 31 Mar 2009 17:15:10 -0600

Dayton Loudspeaker has just made it easier for you to build that awesome subwoofer you've always wanted! Perfect for the builder who does not have the time, equipment or patience to build his or her own subwoofer system from scratch. The cabinets utilize 3/4" MDF (the speaker cabinet material of choice), are precision CNC cut, and then assembled with polyurethane glue for superior strength. Strong edge joints and internal brace are important for achieving strength and minimal panel resonance. The enclosure is meticulously sanded and primed, then painted with three coats of textured matte black enamel to create a durable long lasting finish. All edges have a 1/4" roundover and a 1" grill wrapped in black cloth to finish off the aesthetically pleasing design. Note: These cabinets do not have cutouts for amplifiers, woofers, or spikes-- you will need to cut your own holes per your design.
Price=$249.99
Buy

Dayton HDSG-8 Heavy Duty 8" Speaker Grill

Tue, 31 Mar 2009 17:15:10 -0600

Provide your expensive speakers with the best protection. Dayton Professional HDSG Series 8" grills are the ultimate defense against feet, mic stands, and flying bottles. Powder coated 1.2 mm steel is punched, shaped, and trimmed with a vibration-dampening vinyl trim ring, ensuring years of service. Easily attach with accessory clamp kit, sold separately.
Price=$9.99
Buy

Tang Band W3-1750S 3" Neodymium Subwoofer

Tue, 31 Mar 2009 17:15:08 -0600

The Tang Band W3-1750S employs a square diaphragm to maximize the effective area of a 3" driver. Its patented structure and advanced materials combine with the 1-1/4" long throw voice coil and neodymium motor to provide exceptional output and power handling from a compact subwoofer. Specifications: Power handling: 25 watts RMS/50 watts max *VCdia: 1-1/4" *Impedance: 8 ohms *Re: 6.5 ohms *Frequency range: 65-800 Hz *Fs: 65 Hz *SPL: 84 dB 1W/1m *Vas: 0.064 cu. ft. *Qms: 5.5 *Qes: .34 *Qts: .32 *Xmax: 1.75 mm *Dimensions: A: 3.35 x 3.94", B: 3.07", C: 1.7".
Price=$35.99
Buy

Leviton Quickport White RCA Jack Coaxial Cable Compression Connector Black Inner Barrel

Tue, 31 Mar 2009 17:14:52 -0600

Leviton 40782-REW white Quickport compression RCA connector jack with a black inner barrel. Special radial compression design assures more secure termination than traditional hex crimp connectors. Each is individually packaged.
Price=$2.99
Buy

2-1/4" Round Mini Speaker 8 Ohm

Tue, 31 Mar 2009 17:14:52 -0600

2-5/8" round, 8 ohm, 0.25 watt general purpose replacement speaker. Paper cone, ferrite ceramic magnet. Made in Taiwan. Limited availability. Factory buyout. Specifications: Power handling: 0.25 watts RMS/0.5 watts max *Impedance: 8 ohms *Re: 6.73 ohms *Frequency range: 550-6,000 Hz *Fs: 552.5 Hz *SPL: 83 dB 1W/1m *Vas: 0.0028 cu. ft. *Qms: 11.78 *Qes: 10.59 *Qts: 5.576 *Dimensions: A: 2-1/4", B: 2", C: 3/4".
Price=$3.99
Buy

Goldwood GW-206/4 6-1/2" OEM Woofer 4 Ohm

Tue, 31 Mar 2009 17:14:52 -0600

These low frequency OEM drivers are ideal for the customer who is looking for inexpensive replacement woofers. Each woofer features a treated paper ribbed cone, vented pole piece, moisture resistant poly foam surround, and stamped steel frame. Specifications: *Power handling: 90 watts RMS/180 watts max *Voice coil diameter: 1-1/2" *Le: .4 mH *Re: 3.7 ohms *Frequency range: 60-3,000 Hz *Fs: 60 Hz *SPL: 91 dB 2.83V/1m *Vas: .42 cu. ft. *Qms: 3.50 *Qes: .73 *Qts: .61 *Xmax: 3.5 mm *Dimensions: Overall Diameter: 6-1/2", Cutout Diameter: 5-5/8", Mounting Depth: 3-5/16".
Price=$15.34
Buy

Cerwin Vega Pro Je-36B 18-Inch Junior Earthquake Folded Horn Bass Cabinet

Tue, 31 Mar 2009 17:14:51 -0600

CERWIN VEGA PRO JE-36B 18" JUNIOR EARTHQUAKE FOLDED HORN BASS CABINET 18" WOOFER WITH 3" VOICE COIL; FREQ. RESP: 35 HZ - 300 HZ; PEAK POWER HANDLING: 1000W; PROGRAM POWER HANDLING: 500W; MAX SPL: 136 DB; NOMINAL IMPEDANCE: 8_; SENSITIVITY (1W/1M): 106 DB; SUGGESTED CROSSOVER FREQUENCY: 60HZ - 160HZ LOW PASS; CONNECTIONS: 1/4" PHONE, NEUTRIK SPEAKON(TM); DURABLE MULTI-PLY CONSTRUCTION; HIGH QUALITY BLACK CARPET FOR DURABILITY
Price=$748.09
Buy

Dayton PT4-IF 4" Inside Flare

Tue, 31 Mar 2009 17:14:50 -0600

#8-32 x 1-1/4" Black Machine Screw Button Head Security Hex

Tue, 31 Mar 2009 17:14:48 -0600

Handsome black phosphate button head machine screw is perfect for use with T-nuts or H-nuts in premium quality loudspeaker construction. The aesthetically pleasing security hex style drive offers a simple and elegant look that at the same time can help prevent unauthorized driver removal. #8-32 thread, 1-1/4" long, fully threaded. Uses 5/32" security hex drive bit.
Price=$0.50
Buy

Vinyl Cabinet Covering Black Taco Yard 54" Wide

Tue, 31 Mar 2009 17:14:47 -0600

This high quality black vinyl covering features a leather grain style finish and includes an interwoven cloth backing for extra toughness. Gives a professional look to stage monitors, amplifier cabinets, racks, or any pro sound equipment. Heavy weight 25 oz. material. Sold by the linear yard. 54" wide.
Price=$14.50
Buy

Eminence APT-80 Super Tweeter with 80° Conical Horn

Tue, 31 Mar 2009 17:14:45 -0600

The APT high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm, which has unique properties of stiffness and damping. By fluid cooling the voice coil, increased power handling, controlled low frequency behavior and long-term reliability are assured. The APT-80 super tweeter is pre-mounted on an 80° conical horn lens. Specifications: * Power handling: 45 watts RMS (crossover frequency 3.5 kHz, 18 dB/octave), 85 watts RMS (crossover frequency 5 kHz, 18 dB/octave) * Impedance: 8 ohms * Useable range: 3,500-20,000 Hz * Fs: 2,500 Hz * Recommended crossover: 3,500 Hz * Mfg. #APT-80 * Dimensions: 3.4" W x 3.4" H x 2.9" D.
Price=$34.99
Buy

SPEAKER INPUT TERMINAL ROUND SPRING-TYPE

Tue, 31 Mar 2009 17:14:44 -0600

Round spring terminal cup includes red and black terminals for easy polarity identification. Mounting holes located on the cardinal points. Includes mounting gasket, measures 4-1/2" round and requires 3-3/8" cutout.
Price=$0.99
Buy

2-1/4" Round Mini Speaker 8 Ohm

Tue, 31 Mar 2009 17:14:30 -0600

2-1/4" round, 8 ohm, 0.25 watt general purpose replacement speaker. Paper cone, Alnico magnet. Unit comes with 6" wire lead attached. Made in Taiwan. Limited availability. Factory buyout. Specifications: Power handling: 0.25 watts RMS/0.5 watts max *Impedance: 8 ohms *Re: 7.68 ohms *Frequency range: 355-10,000 Hz *Fs: 355.3 Hz *SPL: 82 dB 1W/1m *Vas: 0.0053 cu. ft. *Qms: 8.012 *Qes: 6.779 *Qts: 3.672 *Dimensions: A: 2-1/4", B: 2", C: 3/4".
Price=$3.99
Buy

Goldwood GW-204/8S 4" Shielded Poly Woofer 8 Ohm

Tue, 31 Mar 2009 17:14:30 -0600

The poly-laminated paper cone, treated foam surround, and polymer dustcap give these drivers a very smooth frequency response with minimal cone breakup. The shielded magnet structure of this driver makes it great for A/V applications. *Power handling: 40 watts RMS/70 watts max *Voice coil diameter: 1" *Le: .2 mH *Impedance: 8 ohms *Re: 7.3 ohms *Frequency range: 100-10,000 Hz *Fs: 138 Hz *SPL: 83.5 dB 2.83V/1m *Vas: .035 cu. ft. *Xmax: 1.5 mm *Qms: 6.81 *Qes: 2.02 *Qts: 1.56 *Dimensions: Overall Diameter: 4-1/2", Cutout Diameter: 4", Mounting Depth: 2-9/16".
Price=$9.67
Buy

Dayton PT4-CR 4" Coupler Ring

Tue, 31 Mar 2009 17:14:29 -0600

Dayton Create-Your-Own Flared Port Tube System Ports are an integral part of any loudspeaker system, so why skimp where it counts? Dayton Loudspeaker has developed the first a la' Carte port tube system that allows you to buy the parts you need to get the tuning you want. A selection of flares, elbows, and straight tubes allows you to create a port that will fit in any cabinet. Constructed from very high quality ABS plastic, the aesthetics of these ports is heads-and-shoulders above similar products. 4" coupler ring allows coupling of 4" elbows with 4" straight tubes, or for connecting two straight tubes.
Price=$2.99
Buy

Sony CRU55SG11/S Colored Speaker Grille for Sony KDL-55XBR8 Televisions (Silver)

Tue, 31 Mar 2009 17:14:27 -0600

Price=$129.99
Buy

Dayton DC250-8 10" Classic Woofer

Tue, 31 Mar 2009 17:14:27 -0600

One of the main design goals at Dayton Loudspeaker is to create loudspeakers that can achieve high levels of performance at reasonable prices. Our import series of treated cone drivers are developing quite a reputation for having the best price/performance value available anywhere. Non-pressed treated paper cones, ASV voice coils, vented pole pieces, rubber surrounds, coated cloth dust caps, and excellent low frequency performance are just some of the features you'll find on these quality woofers. Specifications: * Power handling: 70 watts RMS/105 watts max * Voice coil diameter: 1-3/8" * Le: 2.57 * Impedance: 8 ohms * Re: 6.7 ohms * Frequency response: 25-2,500 Hz * Magnet weight: 20 oz. * Fs: 29 Hz * SPL: 89 dB 1W/1m * Vas: 3.93 cu. ft. * Qms: 4.05 * Qes: .50 * Qts: .45 * Xmax: 4.5mm * Dimensions: Overall Diameter: 10-1/16", Cutout Diameter: 9-5/16", Mounting Depth: 4-7/16", Magnet Diameter: 4-3/16", Magnet Height: 1-1/4".
Price=$34.99
Buy

Penn-Elcom L905/927Z Locking Butterfly Latch 4.125" Zinc

Tue, 31 Mar 2009 17:14:26 -0600

Superb quality butterfly latch for a variety of cabinet applications. A universal backplate is available for added strength and durability. Manufactured by Penn Fabrication in the UK. * Construction: 1.2mm/.047" steel * Description: Locking butterfly latch in split plain dish * Dimensions: 4" x 4.125" * Color: Zinc * Mfg. #L905/927Z.
Price=$16.47
Buy

Dayton SG1522-6R Formed Metal Grill Pair

Tue, 31 Mar 2009 17:14:26 -0600

6 mm round hole, 15" x 22" x 1" grill. Dayton Professional formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets. The black powder coated 1.2 mm steel is punched in your choice of three hole patterns: 6 mm round (6R), 8 mm round (8R), and 8 mm square (8S). Each hole pattern is available in four finished grill sizes: 12" x 18", 15" x 22", 18" x 28", and 22" x 30". A carefully formed 1" bend on each edge provides extra strength to the grill, as well as creating a convenient mounting "stand off" for many installations. Additionally, each hole pattern is available in a 22" x 30" utility "flat" version (no bends), which can be used as is or custom cut by the user. Available in sizes to fit most 8", 10", 12", 15", and 18" speakers. Note: due to variations in the metal forming process, published dimensions are nominal and should be considered "approximate". Actual grill size could vary from stated dimensions by up to 1/2". Suggested applications: 10" 2-way with horn: 12" x 18" grill 12" 2-way with horn: 15" x 22" grill 15" 2-way with horn: 18" x 28" grill 15" 3-way with cone mid and horn: 22" x 30" grill 18" single driver subwoofer: 22" x 30" grill 2 x 12" guitar cabinet: 18" x 28" grill
Price=$38.99
Buy

Port Tube 2-3/4" ID x 1" L

Tue, 31 Mar 2009 17:14:25 -0600

Give your cabinets a professional appearance with these attractive, black plastic port tubes. When properly tuned, the port contributes significantly to the low frequency output of the speaker system.
Price=$1.12
Buy

Goldwood GW-S525/8 5-1/4" Poly Cone Woofer 8 Ohm

Tue, 31 Mar 2009 17:14:25 -0600

These silver polymer cone woofers feature a cosmetic stamped steel frame, vented and bumped back plate, and high-quality rubber surround. The relatively shallow profile, polymer construction, and T/S parameters make them great for automotive environments. *Power handling: 70 watts RMS/130 watts max *VCdia: 1" *Le: .40 mH *Impedance: 8 ohms *Re: 7.0 ohms *Frequency range: 50-5,500 Hz* *Fs: 81 Hz * SPL: 84.7 dB 2.83V/1m *Vas: .13 cu. ft. * Qms: 2.87 *Qes: 1.18 * Qts: .84 *Xmax: 2.0 mm *Dimensions: Overall Diameter: 5-5/8", Cutout Diameter: 4-9/16", Mounting Depth: 2-1/2".
Price=$12.67
Buy

5" SWIVEL CASTER 250 LB. CAPACITY

Tue, 31 Mar 2009 17:14:24 -0600

The 3800 series of low-cost casters are perfect for equipment racks, bass bins, movie and soundstage equipment, or storage containers for the weekend band to the professional touring musician. Other applications include light-duty material handling equipment, food service carts & equipment, bakery racks & equipment, miscellaneous dollies, mobile cases, displays, mobile wire racking, stock carts, textile applications, warehouse & manufacturing applications, etc. Sold individually. • 5" Swivel Caster • Overall height: 5-3/4" • Top plate: 2-1/2" x 3-5/8" • Bolt hole pattern: 1-3/4" x 2-7/8" slotted to 3" • Ball bearing
Price=$11.95
Buy

Penn-Elcom D2101K Blank Dish Black 5" x 7"

Tue, 31 Mar 2009 17:14:09 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Plain dish constructed of 1.2mm/.047" thick steel. Cut and drill your own holes for custom applications. Black powdercoat finish. Dimensions: 5" x 7". Mfg. #D2101K.
Price=$5.57
Buy

Goldwood GW-204/4S 4" Shielded Poly Woofer 4 Ohm

Tue, 31 Mar 2009 17:14:08 -0600

The poly-laminated paper cone, treated foam surround, and polymer dustcap give these drivers a very smooth frequency response with minimal cone breakup. The shielded magnet structure of this driver makes it great for A/V applications. *Power handling: 40 watts RMS/70 watts max *Voice coil diameter: 1" *Impedance: 4 ohms *Frequency range: 100-10,000 Hz *Fs: 138 Hz *SPL: 86 dB 2.83V/1m *Vas: .035 cu. ft. *Xmax: 1.5 mm *Qms: 7.19 *Qes: 2.20 *Qts: 1.69 *Dimensions: Overall Diameter: 4-1/2", Cutout Diameter: 4", Mounting Depth: 2-9/16".
Price=$9.67
Buy

Pioneer C16LU20-51F 6-1/2" Woofer

Tue, 31 Mar 2009 17:14:07 -0600

Polymer resin treated paper cone with poly foam surround. Long throw voice coil design helps to deliver powerful bass output. Perfect for bookshelf type speakers. * Power handling: 60 watts RMS/120 watts max * Voice coil diameter: 1-1/4" * Impedance: 8 ohms * Frequency response: 57-7,000 Hz * Magnet weight: 20 oz. * SPL: 93 dB 1W/1m * Vas: .53 cu. ft. * Xmax: 1.7mm * Qms: 7.63 * Qes: .23 * Qts: .22 * Fs: 57 Hz * Net weight: 3-1/2 lbs. * Manufacturer model number: C16LU20-51F * Dimensions: Overall Diameter: 6-1/2", Cutout Diameter: 5-1/2", Mounting Depth: 3-1/8", Magnet Diameter: 4-7/8", Magnet Height: 1-1/8".
Price=$24.82
Buy

Band-It Gray Melamine 24" x 96" Iron-On

Tue, 31 Mar 2009 17:14:06 -0600

Band-It's gray textured melamine facing is an excellent choice when you need a durable, attractive finish for your loudspeakers. The material is very flexible, and offers a textured finish that is very wear-resistant. An iron-on adhesive allows it to adhere very well to just about any substrate, including metal and MDF end-grain. Simply cut your pieces a bit oversized, iron melamine to secure, and trim edges with the Band-It edge trimmer or utility knife. Sold in 2 ft. by 8 ft. rolls.
Price=$31.55
Buy

Dayton SD315-PR 12" Passive Radiator

Tue, 31 Mar 2009 17:14:06 -0600

The new Dayton Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems. Specifications: * Fs: 17 Hz * Vas: 5.20 cu. ft. * Qms: 3.00 * Cms: .45 mm/N * Mms: 200 g * Rms: 7.03 kg/s * Sd: 480 sq. cm. * Xmax: 10mm * Dimensions: A: 12-3/8", B: 10-3/4", C: 3-3/8".
Price=$37.99
Buy

Jantzen JA-6012 6" Midbass Driver 12 Ohm

Tue, 31 Mar 2009 17:14:05 -0600

Jantzen's JA-6012 6” 12 ohm midbass driver features a massive 3" voice coil that provides exceptional linearity, a one-piece cast aluminum frame, polished steel magnet cap, rubber surround, and a polypropylene cone. The spider and pole piece are thoroughly vented to facilitate high power handling and to minimize compression. Great for MTM designs. The exceptional quality and craftsmanship are apparent at first glance—truly a sight to behold. Specifications: *Power handling: 100 watts RMS/150 watts max *Voice coil diameter: 3" *Impedance: 12 ohms *Re: 10.3 ohms *Frequency response: 50-5,000 Hz *Fs: 54 Hz *SPL: 86 dB 1W/1m *Vas: .50 cu. ft. *Qms: 2.08 *Qes: .83 *Qts: .59 *Xmax: 6 mm *Dimensions: Overall diameter: 6-7/8", Cutout: 5-1/2", Mounting depth: 2-7/8".
Price=$286.36
Buy

OEM Systems Pro-Wire Jack Plate (4 Banana), White

Tue, 31 Mar 2009 17:14:04 -0600

Price=$11.95
Buy

Leviton QuickPort Decora Plus - Wall mount plate - white - 3 ports

Tue, 31 Mar 2009 17:14:03 -0600

PRODUCT FEATURES:Combine voice, data, audio and video in one compact, attractive Decora wallplate openingOffers designer style to match Leviton Decora electrical switches and outlets, with capacity and flexibility to support high-tech communications for boardrooms or workstationsQuickPort snap-in modules fit neatly into a single gang Decora wallplate and can be combined with other Decora devices in a multi-gang wallplate
Price=$2.99
Buy

Goldwood GW-S650/8 6-1/2" Poly Cone Woofer 8 Ohm

Tue, 31 Mar 2009 17:14:02 -0600

These silver polymer cone woofers feature a cosmetic stamped steel frame, vented and bumped back plate, and high-quality rubber surround. The relatively shallow profile, polymer construction, and T/S parameters make them great for automotive environments. Specifications: *Power handling: 80 watts RMS/170 watts max *VCdia: 1" *Le: .40 mH *Impedance: 8 ohms *Re: 7.0 ohms *Frequency range: 35-5,000 Hz* *Fs: 55 Hz * SPL: 86 dB 1W/1m *Vas: .50 cu. ft. * Qms: 3.60 *Qes: 1.09 * Qts: .83 *Xmax: 2.5 mm *Dimensions: Overall Diameter: 7", Cutout Diameter: 5-7/8", Mounting Depth: 2-7/8".
Price=$17.00
Buy

On-Q AnyPort High-Performance "F" Insert, Light Almond

Tue, 31 Mar 2009 17:14:01 -0600

This high quality anyport insert is for use in all AnyPort Wall Plates.
Price=$3.32
Buy

Dayton DSS4-G Gold Speaker Spike Set 4 Pcs.

Tue, 31 Mar 2009 17:13:48 -0600

By rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system, it is possible to dramatically improve clarity, stereo imaging and bass response. This is very apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable gold finish. Each cone spike weighs 86 grams and measures 1-1/4" diameter and 1-1/2" tall. The two piece threaded tip design allows for precise level adjustment. T-nuts and threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes 4 gold cone spikes, 4 gold floor discs, 4 T-nuts and 4 threaded studs.
Price=$34.99
Buy

True Touch Lighting Control

Tue, 31 Mar 2009 17:13:47 -0600

Digital touch dimmer

LED Indicator

Includes 2 trim kits
Price=$23.99
Buy

SmartDisk TST 329 TACTILE SOUND ( 8248 )

Tue, 31 Mar 2009 17:13:46 -0600

Tactile Sound has been the leader in design and production of tactile transducers for over 10 years. Their unique products are designed to provide the best possible sensory experience, taking music and movie listening to another level. Utilizing the latest in engineering and materials, their products have continually improved into a complete line of one-of-a-kind transducers. Whether you are constructing a home theatre, building a garden sound system, or adding sound to your swimming pool, Tactile Sound has a product that can enhance your experience. Originally developed for military simulation devices, the home theater transducers were specifically designed to provide realistic reproduction of highly dynamic bass-- making explosions, gunshots, and any other bass impacts feel real. Tactile Sound transducers are an essential element of the ultimate home theater experience. By utilizing neodymium magnets in the motor, higher sensitivity and overall output is achieved. Built to military specifications, the Gold can be used to drive small floor areas and seating risers with authority. Specifications: *Power handling: 135 watts RMS/400 watts max *Tactile frequency range: 10-800 Hz *Audible frequency range: 20-17,0000 Hz *Impedance: 4 ohms *Transduction force: 2.8 lb-ft/watt *Tactile force peak: 378 lb-ft *Dimensions: 8" dia. x 2.25" H.
Price=$349.95
Buy

Alesis 5-1/4" Poly Cone Woofer

Tue, 31 Mar 2009 17:13:45 -0600

Specifications: *Power handling: 50 watts RMS/100 watts max *VCdia: 1" *Le: .17 mH *Impedance: 8 ohms *Re: 6.0 ohms *Frequency range: 73-4,500 Hz *Fs: 73 Hz *SPL: 87 dB 1W/1m *Vas: .26 cu. ft. *Qms: 4.70 *Qes: .84 *Qts: .71 *Xmax: 2 mm *Dimensions: A: 5-1/2", B: 4-3/4", C: 3".
Price=$30.00
Buy

Selenium 2V2K/350 2-Way Passive Crossover

Tue, 31 Mar 2009 17:13:45 -0600

Faceplate For 2 Hole, White

Tue, 31 Mar 2009 17:13:43 -0600

For use with RJ-45 or BNC jack wall boxes, this patch plate accepts two keystone couplers. Also available in other arrangements and colors.
Price=$13.42
Buy

Dayton PT3-OF 3" Outside Flare

Tue, 31 Mar 2009 17:13:42 -0600

Dayton Create-Your-Own Flared Port Tube System Ports are an integral part of any loudspeaker system, so why skimp where it counts? Dayton Loudspeaker has developed the first a la' Carte port tube system that allows you to buy the parts you need to get the tuning you want. A selection of flares, elbows, and straight tubes allows you to create a port that will fit in any cabinet. Constructed from very high quality ABS plastic, the aesthetics of these ports is heads-and-shoulders above similar products. 3" diameter outside flare with mounting holes, overall diameter: 5-1/2", cutout: 4-5/8"
Price=$9.99
Buy

Dayton MC130-16 Metal 2-Leg Cabinet Corner Black 16 Pcs.

Tue, 31 Mar 2009 17:13:41 -0600

Stylish and durable powder-coated steel corners provide protection and a finished look for small to medium sized speaker cabinets and racks. Dimensions: 1.6" H x 1.6" W x 0.5" D. Sold in a convenient package of 16 each. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$8.99
Buy

6 Zone Speaker Selector with volu

Tue, 31 Mar 2009 17:13:40 -0600

Up to 6 Separate Speaker Pairs to your Stereo System Accepts Speaker Wires Up to 14- Gauge Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms Protection Circuitry Keeps it Running Smoothly Individual Speaker Volume Control Support Two Stereo Amplifiers Frequency Response: 20Hz-20KHz Dimensions: 16.92(W) x 3.03(H) x 6.29(D) Sold as: Unit No accessories defined. No specifications defined.
Price=$188.16
Buy

True Audio TrueRTA Audio Spectrum Analyzer Software

Tue, 31 Mar 2009 17:13:39 -0600

True Audio’s Level Two (1/3 per octave) TrueRTA™ is a real-time software-based audio instruments for testing and evaluating audio systems using a PC with basic sound capability. TrueRTA™ also includes digital voltmeter that reads true rms voltage and dBu levels, and an audio spectrum analyzer. To set up your own audio test lab you will need a digital voltmeter to calibrate TrueRTA™ for your sound card and a collection of cables and adapters for connecting electronic gear to your sound card for testing. Most sound card jacks are 1/8 inch. If you want to do acoustic testing of loudspeakers in addition to the above you will need a calibrated microphone (True Audio recommends the Behringer EMC8000), a microphone preamplifier or mixer,an audio power amplifier to drive the speaker under test and cables to connect the line out of the sound card to the input of the audio power amp. Software can be upgraded to Level Three (1/6th octave) or Level Four (1/24th octave). Minimum System Requirements: 500MHz Pentium III processor and 64MB of RAM
Read more

5" 2-Way 300-Watt Wall Mountable Satellite Speakers

Tue, 31 Mar 2009 17:13:24 -0600

60Hz-30kHz frequency response

300 watts peak (40 watts continuous), 2-way, 8 Ohm, video shielded speakers

5" PolyPlas woofer and 3/4" titanium-laminate dome tweeter

14 5/16"H x 6 1/8"W x 4 9/16" D

Includes wall mount brackets
Price=$429.99
Buy

Dayton SG1218-6R Formed Metal Grill Pair

Tue, 31 Mar 2009 17:13:24 -0600

6 mm round hole, 12" x 18" x 1" grill. Dayton Professional formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets. The black powder coated 1.2 mm steel is punched in your choice of three hole patterns: 6 mm round (6R), 8 mm round (8R), and 8 mm square (8S). Each hole pattern is available in four finished grill sizes: 12" x 18", 15" x 22", 18" x 28", and 22" x 30". A carefully formed 1" bend on each edge provides extra strength to the grill, as well as creating a convenient mounting "stand off" for many installations. Additionally, each hole pattern is available in a 22" x 30" utility "flat" version (no bends), which can be used as is or custom cut by the user. Available in sizes to fit most 8", 10", 12", 15", and 18" speakers. Note: due to variations in the metal forming process, published dimensions are nominal and should be considered "approximate". Actual grill size could vary from stated dimensions by up to 1/2". Suggested applications: 10" 2-way with horn: 12" x 18" grill 12" 2-way with horn: 15" x 22" grill 15" 2-way with horn: 18" x 28" grill 15" 3-way with cone mid and horn: 22" x 30" grill 18" single driver subwoofer: 22" x 30" grill 2 x 12" guitar cabinet: 18" x 28" grill
Price=$30.99
Buy

Dayton TW-0.25BK 0.25 ft³ 2-Way Cabinet Pair Gloss Black

Tue, 31 Mar 2009 17:13:22 -0600

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 12" H x 7.5" W x 10" D. Note: Cabinet dimensions do not include grill
Price=$179.99
Buy

New Construction Rough In Frame for SP6C+ SP6CS + HTI6C(SINGLES)

Tue, 31 Mar 2009 17:13:19 -0600

Harman International is a company of listeners. From the earliest days of high fidelity, Harman's guiding principle has been the same: not technology for technology's sake, but technology for the music's sake. Harman's long-standing, commitment to technical excellence, product quality and industrial design, all stem directly from company's passion for the music.
Price=$24.95
Buy

Gold Pressfit Banana 5-Way Speaker Terminal

Tue, 31 Mar 2009 17:13:18 -0600

Recessed pressfit terminal with gold plated posts and knurled knobs. Color coded. Accepts up to 8 gauge wire. Can also be used with dual banana plugs. Overall size: 3-1/8" round; cutout: 2-7/8".
Price=$4.47
Buy

PROCO WP2011 (4) XLR FEMALE WALLPLATE DUAL GANG

Tue, 31 Mar 2009 17:13:18 -0600

Attention Installers! These pre-assembled wall plates are constructed of brushed 430 stainless steel alloy and utilize some of the highest quality, brand-name connectors available. The connectors are riveted for durability and all conductors are panel-isolated. All plates conform to NEMA box standards and include mounting hardware.
Price=$37.49
Buy

Pioneer Elite M-10X

Tue, 31 Mar 2009 17:13:16 -0600

You're probably thinking THX Surround EX, right? This is why Pioneer has designed this golden amplifier specifically to enhance the additional 2 surround back channels, in the THX Surround EX system. And the gold finish perfectly matches the other components - VSA-E08 and VSX-909RDS-G. Just the extra touch you'd expect.
Price=$399.98
Buy

Goldwood GT-510/S 1" Shielded Soft Dome Tweeter

Tue, 31 Mar 2009 17:13:15 -0600

Specifications: *Power handling: 50 watts RMS/100 watts max *VCdia: 1" *Impedance: 8 ohms *Fs: 1300 Hz * Frequency response: 3,000 - 20,000 Hz *SPL: 90 dB 1W/1m *Dimensions: A: 4", B: 2-7/8, C: 1-3/4".
Price=$11.00
Buy

Dayton MH118 Recessed Flip Handle Nickel

Tue, 31 Mar 2009 17:13:15 -0600

Strong and cost effective handle solution for speaker enclosures, racks, and road cases. Spring-loaded handle with comfortable 5/8" diameter rubber grip. Heavy steel construction with bright zinc and nickel plating. Dimensions: 6-1/16" W x 4" H x 1/2" D. Cutout dimensions: 5" W x 3" H. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$7.99
Buy

CLARK SYNTHESIS TI-300 NEOPRENE ISOLATION FURNITURE MOUNT

Tue, 31 Mar 2009 17:13:14 -0600

The Tactile Sound rubber isolation feet are designed to substantially improve the performance of the home theater transducers. When attached under the legs of sofas and chairs, the furniture is decoupled from the floor, which concentrates the vibrational forces into the seats. At the same time, extraneous sound transmission into neighboring rooms or apartments is drastically reduced.
Price=$59.95
Buy

Kicker Compvx10 4ohm

Tue, 31 Mar 2009 17:12:59 -0600

CVX10 10" CompVX Poly cotton semi progressive spider Jacketed braided tinsel leads Uniplate Cast aluminum basket Santoprene rubber surrounds T cut top plate Dual 4 ohm voice coils 1200 watts max power handling 600 Watts RMS power handling 87.2 dB sensitivity 24500 K frequency response 5 15/16" Mounting depth 9 1/4" cut out diameter Sealed box .8 3.00 cubic feet Min vented box 1.25 1.75 cubic feet Solokon 1 piece cone
Price=$399.00
Buy

QuickPort 2-Port Wallplate Insert, Almond

Tue, 31 Mar 2009 17:12:58 -0600

Combine voice, data, audio and video in one compact, attractive Leviton Decora Quickport 2-Port Wallplate Insert. This Wallplate Insert offers designer style to match Leviton Decora electrical switches and outlets, with capacity and flexibility to support high-tech communications for boardrooms or workstations. QuickPort snap-in modules fit neatly into a single gang Decora wallplate and can be combined with other Decora devices (with a barrier box) in a multi-gang wallplate.
Price=$3.95
Buy

Boston Acoustics - VRi593

Tue, 31 Mar 2009 17:12:58 -0600

In wall LCR w/ 3-way speaker design (sold individually)
Price=$1000.00
Buy

Goldwood GW-408D 8" Poly DVC Woofer

Tue, 31 Mar 2009 17:12:57 -0600

This woofer provides added versatility over single voice coil woofers by allowing the use of both channels of a stereo amplifier to driver one speaker, and the ability to wire the voice coils in varying configurations. They feature polymer laminated paper cones, treated foam surrounds, and vented pole pieces with back plates. This driver features a fully shielded motor. Note: All parameters are with voice coils connected in parallel. Specifications: *Power handling: 100 watts RMS/220 watts max *Voice coil diameter: 1-1/2" *Le: .5 mH *Impedance: 8 ohms per coil *Re: 3.7 ohms *Frequency range: 44-3,000 Hz *Fs: 51 Hz *SPL: 90.8 dB 2.83V/1m *Vas: .73 cu. ft. *Qms: 4.46 *Qes: .75 *Qts: .64 *Xmax: 3.5 mm *Dimensions: Overall Diameter: 8", Cutout Diameter: 7-1/8", Mounting Depth: 3-5/8".
Price=$20.73
Buy

Banana 5-Way Speaker Terminal

Tue, 31 Mar 2009 17:12:56 -0600

Rectangular terminal with binding posts. Includes gasket for a leak free seal. Color coded. Accepts up to 10-12 gauge wire. Also can be used with dual banana plugs. Outside Dimensions: 2-1/8" x 15/16".
Price=$2.18
Buy

Pioneer B20FU20-51FW 8" Full Range Driver

Tue, 31 Mar 2009 17:12:55 -0600

Paper cone with poly foam surround. Incorporates a center whizzer cone. Recommended for sound reinforcement or single component cabinets where a wider frequency coverage pattern is required. * Power handling: 60 watts RMS/85 watts max * Voice coil diameter: 1-1/2" * Impedance: 8 ohms * Frequency response: 36-17,000 Hz * Magnet weight: 20 oz. * Fs: 43 Hz * SPL: 90 dB1W/1m * Vas: 1.75 cu. ft. * Xmax: 3.0mm * Qms: 3.02 * Qes: .62 * Qts: .51 * Net weight: 5 lbs. * Manufacturer model number: B20FU20-51FW * Dimensions: Overall Diameter: 8-1/8", Cutout Diameter: 7-1/4", Mounting Depth: 4-1/8", Magnet Diameter: 4-1/4", Magnet Height: 1-1/4".
Price=$30.62
Buy

Pioneer B11EC80-02F 5-1/4" Cup Midrange

Tue, 31 Mar 2009 17:12:54 -0600

Paper cone with treated cloth surround. Tuned cup midrange with internal sound dampening material. Ferro fluid cooling provides maximum heat dissipation and increased power handling capability. Low distortion and high linearity provide excellent reproduction of midrange frequencies. Specifications: *Power handling: 50 watts RMS/75 watts max *Voice coil diameter: 1" *Impedance: 8 ohms *Frequency response: 320-6,000 Hz *Magnet weight: 9.3 oz. SPL: 94 dB 1W/1m *Net weight: 2 lbs. *Manufacturer model number: B11EC80-02F *Dimensions: Overall Diameter: 5-1/4", Cutout Diameter: 4-1/8", Mounting Depth: 3-3/4", Magnet Diameter: 3-1/2", Magnet Height: 3".
Price=$15.50
Buy

HDMI Single Port Wall Plate With Short Cable, White

Tue, 31 Mar 2009 17:12:53 -0600

Adding HDMI wall plate jacks in your home or office can be very difficult due to the shape and style of the HDMI connector itself. This unique wall plate has a flexible gender changer (female to female) built into the back so you can use standard HDMI cables in regular walls without having to bend your cables at angles that could damage them. Includes mounting hardware.
Price=$14.99
Buy

Sony CRU40SG12/R Colored Speaker Grille for Sony KDL-40XBR6 Televisions (Red)

Tue, 31 Mar 2009 17:12:53 -0600

Price=$99.99
Buy

Penn-Elcom D01K Dish Two 1/4" & Neutrik D Black 4" x 4-3/8"

Tue, 31 Mar 2009 17:12:52 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Steel dish pre-punched for mounting two 1/4" phone jacks along with two Neutrik "D" Series and/or Speakon® NL2/NL4 panel mount connectors. Constructed of heavy-duty 1.2mm/.047" steel. Black powdercoat finish. Dimensions: 4" x 4.375". Mfg. #D01K.
Price=$4.18
Buy

Dayton IMS-714 In-Wall Mounting System

Tue, 31 Mar 2009 17:12:37 -0600

Dayton Loudspeaker® takes speaker building into the wall with in-wall mounting systems. Now you can choose the drivers and crossovers to create professional looking in-wall speakers. Got a great speaker design? Create center channel and surrounds to match your stereo speakers for a complete custom home theater system. Three-piece design makes installation in new or existing walls a snap. Frames are made of ABS plastic with a metal brace; the baffle is 1/2" MDF with a black satin finish; grills are made of fine mesh steel with painted finish. System comes complete with frame, blank baffle, grill, mounting template, and hardware. This mounting system also allows the versatility offered by the Baffle Replacement and EXchange (B-REX) system, which allows the front baffle to be easily removed for prototyping and construction. This infinitely re-installable approach works great particularly for making initial driver cutouts. Blank baffles are available separately, allowing further possibilities. As you can see, the versatility offered by the B-REX system is unmatched in the industry! Dimensions: 15-3/4" H x 9" W. Cutout size: 14-7/16" L x 7-7/8" W. Minimum horizontal spacing between studs: 13-15/16". Sold individually.
Price=$39.99
Buy

Precision Port 2" Flared Port Tube Kit

Tue, 31 Mar 2009 17:12:36 -0600

The unique flared-end construction of the Precision Port™ system enables it to outperform any standard port tube on the market. Conventional tubes suffer from nasty turbulence at the entrance and exit of the port, producing unwanted noise and poor sound quality. The Precision Port™ system overcomes these problems and as a result can actually produce a gain of up to 3 dB in output! Now you can experience good looks, low distortion, and superior overall sound quality thanks to the Precision Port™ system. The 2" model now comes with starter holes on the rear of the mounting flange, allowing the user to decide whether to use 3 mounting holes, 4 mounting holes, or none at all! All you need is a standard twist-drill to make your custom mounting decision. The central tube can be cut to any desired length, with a maximum overall port length of 11". Once the pieces are cut, the system can be permanently bonded with ABS pipe cement. Also available in 3", 4", and 6" diameters.
Price=$9.65
Buy

Port Tube 2-1/2" ID Adjustable

Tue, 31 Mar 2009 17:12:35 -0600

Perfect for fine tuning bass alignment. Made of impact resistant black plastic. Length 4-5/16 to 8-5/8"
Price=$3.18
Buy

PRO-WIRE IW-4RG RCA JACK PLATE (WHITE)

Tue, 31 Mar 2009 17:12:34 -0600

Goldwood GM-65/8 5" Sealed Back Midrange 8 Ohm

Tue, 31 Mar 2009 17:12:33 -0600

Sealed back midrange eliminates need for separate enclosure. Features treated paper cone, paper surround, and steel mesh grill. *Power handling: 40 watts RMS/55 watts max *Voice coil diameter: 1" *Impedance: 8 ohm *Frequency response: 800-8,000 Hz *Fs: 470 Hz *SPL: 89 dB 1W/1m *Dimensions: Overall Diameter: 5-1/8", Cutout Diameter: 4-1/8", Mounting Depth: 2-1/2", Magnet Diameter: 3-1/8", Magnet Height: 3/4".
Price=$7.24
Buy

Penn-Elcom M1503 ABS Dish One 1/4" + One Neutrik D/NL4MP

Tue, 31 Mar 2009 17:12:32 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Black ABS dish pre-punched for mounting one unified XLR connector e.g. Neutrik D, Speakon® NL4MP, Powercon, etc. & one 1/4" jack. Dimensions: 3.36" x 3.36". Mfg. #M1503.
Price=$1.75
Buy

Pro Co Wall Plate with Dual Female XLR (Model WP1013)

Tue, 31 Mar 2009 17:12:32 -0600

Cabinet Carpet Medium Gray Yard 54" Wide

Tue, 31 Mar 2009 17:12:31 -0600

This high quality carpet conforms easily to sharp corners because it has no stiff backing. You can also stretch it to cover irregular shapes. This is the covering of choice for car, stage, and amplifier cabinets. Carpet is strong, yet easy to cut with knife or scissors. Adhere with spray adhesive or latex contact cements. Provides protection and good looks. Sold by the linear yard. 54" wide. Made in the U.S.A.
Price=$4.78
Buy

Rush, Platinum Aluminum Handle, Plain

Tue, 31 Mar 2009 17:12:30 -0600

ATTRIBUTES Blade Detail: Plain Edge Blade Length (inches): 2.50 Blade Material: Carbon Steel Carry System: Pocket Clip Handle Material: Aluminum Gun Metal Anodized Lock Style: Liner Lock Overall Length (inches): 6.25
Price=$82.00
Buy

Performance Teknique ICBM-771 - Amplifier - 2-channel

Tue, 31 Mar 2009 17:12:30 -0600

Performance Teknique keeps its pride in today's mobile entertainment world by continuing to introduce new products that feature the latest multimedia technology to offer more in-car listening and viewing pleasure than ever imaginable. Performance Teknique's products endure rigorous testing and challenge, so that you can be assured that it is designed and built to provide you with years of enjoyment. At Performance Teknique there is no limits to human imagination. That is why Performance Teknique creates car audio products that help your mobile entertainment reach their full potential. It's not a purpose. It's the passion.PRODUCT FEATURES:24db/oct. crossover slope;Variable subsonic filter (10hz-100hz);Variable low pass filter (30hz-500hz);Variable high pass filter (50hz-1khz);Variable 18db bass boost;High & low level input through RCA;Double sided PCB;Dual protection (thermal & short circuit);RCA line out (preamp);Power & diagnostic led indicator;2 ohm stable stereo;Soft delayed power on;Tri-mode capability;0.05% THD.
Price=$200.00
Buy

Vifa TP16WJ-06-08 6-1/2" Woofer 8 Ohm

Tue, 31 Mar 2009 17:12:16 -0600

Provides very smooth frequency response. Ideal for mid-sized bass reflex designs. The "universal" plastic-injected basket also facilitates automotive installation if desired. Other features include a 1-1/4" diameter vented aluminum voice coil former with 9/16" long copper winding, rubber surround, and mineral filled polypropylene cone. Specifications: *Power handling: 70 watts RMS/100 watts max *VCdia: 1-1/4" *Le: 1.0 mH *Impedance: 8 ohms *Re: 5.6 ohms *Frequency response: 38-5,000 Hz *Fs: 38 Hz *SPL: 87 dB 1W/1m *Vas: 1.05 cu. ft. *Qms: 2.48 *Qes: 0.52 *Qts: 0.43 *Xmax: 4.0 mm *Dimensions: A: 6-1/2", B: 5-3/4", C: 3".
Price=$49.99
Buy

Dayton PT3-ST 3" x 15.75" Straight Tube

Tue, 31 Mar 2009 17:12:14 -0600

Dayton Create-Your-Own Flared Port Tube System Ports are an integral part of any loudspeaker system, so why skimp where it counts? Dayton Loudspeaker has developed the first a la' Carte port tube system that allows you to buy the parts you need to get the tuning you want. A selection of flares, elbows, and straight tubes allows you to create a port that will fit in any cabinet. Constructed from very high quality ABS plastic, the aesthetics of these ports is heads-and-shoulders above similar products. 3" diameter x 15.75" long straight tube
Price=$13.99
Buy

#6 x 1" Coarse Thread Cabinet Screws 100 Pcs.

Tue, 31 Mar 2009 17:12:14 -0600

Perfect for speaker cabinet construction.
Price=$1.76
Buy

Performance Teknique ICBM-774 - Amplifier - 4-channel

Tue, 31 Mar 2009 17:12:13 -0600

Performance Teknique keeps its pride in today's mobile entertainment world by continuing to introduce new products that feature the latest multimedia technology to offer more in-car listening and viewing pleasure than ever imaginable. Performance Teknique's products endure rigorous testing and challenge, so that you can be assured that it is designed and built to provide you with years of enjoyment. At Performance Teknique there is no limits to human imagination. That is why Performance Teknique creates car audio products that help your mobile entertainment reach their full potential. It's not a purpose. It's the passion.PRODUCT FEATURES:Max output power : 250wx4ch @ 2 ohm;24db/oct. crossover slope;High & low level input through RCA;Double sided PCB;Dual protection (thermal & short circuit);RCA line out (preamp);Power & diagnostic LED indicator;2 ohm stable stereo;Soft delayed power on;Tri-mode capability;0.05% THD.
Price=$225.00
Buy

White, 1-Gang Recessed Low Voltage Multi Cable Wall Plate

Tue, 31 Mar 2009 17:12:13 -0600

Recessed Low Voltage Pass-Through Wall Plates give your installation a finished appearance but allows you the versatility of using the cable types of your choice. Multiple lines can be passed through a single plate allow you to mix and match and eliminate the need to have multiple plates spread out across your wall.With these new plates you can install low voltage cables behind your flat panel TV, your amplifier or other audio/video devices, flush to the wall surface.
Price=$29.99
Buy

Tang Band W2-800SL 2" Aluminum/Mg Full Range Driver

Tue, 31 Mar 2009 17:12:12 -0600

Tang Band's miniature W2-800SL full range, wide dispersion driver incorporates an aluminum/magnesium diaphragm, a shielded neodymium magnet, and a sturdy ABS plastic basket. Ideal for multimedia, home theater, and automotive applications. Specifications: Power handling: 10 watts RMS/20 watts max *VCdia: 1" *Impedance: 4 ohms *Re: 3.5 ohms *Frequency range: 160-20,000 Hz *Fs: 160 Hz *SPL: 87 dB 1W/1m *Vas: .0067 cu. ft. *Qms: 2.67 *Qes: .26 *Qts: .23 *Xmax: 1 mm *Dimensions: A: 2.25", B: 2.04", C: 1.18".
Price=$22.99
Buy

Four Conductor Speaker Terminal

Tue, 31 Mar 2009 17:12:11 -0600

4 output, quick release spring loaded speaker terminal. Right/left identification. Accepts up to 12 gauge wire. Outside Dimensions: 2-3/4" x 15/16".
Price=$1.63
Buy

Performance Teknique ICBM-775 - Amplifier - 4-channel

Tue, 31 Mar 2009 17:12:10 -0600

Performance Teknique keeps its pride in today's mobile entertainment world by continuing to introduce new products that feature the latest multimedia technology to offer more in-car listening and viewing pleasure than ever imaginable. Performance Teknique's products endure rigorous testing and challenge, so that you can be assured that it is designed and built to provide you with years of enjoyment. At Performance Teknique there is no limits to human imagination. That is why Performance Teknique creates car audio products that help your mobile entertainment reach their full potential. It's not a purpose. It's the passion.PRODUCT FEATURES:Max output power : 250wx4ch @ 2 ohm;24db/oct. crossover slope;High & low level input through RCA;Double sided PCB;Dual protection (thermal & short circuit);RCA line out (preamp);Power & diagnostic LED indicator;2 ohm stable stereo;Soft delayed power on;Tri-mode capability;0.05% THD.
Price=$175.00
Buy

Goldwood GW-1248 12" Butyl Surround Woofer 8 Ohm

Tue, 31 Mar 2009 17:12:10 -0600

Butyl rubber surrounds are superior to foam in two important ways. First, the butyl rubber resists moisture and will not dry rot, prividing years of service. Second, the rubber surround, due to its superior damping characteristics will greatly reduce cone break up and ensure low distortion. These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame. Specifications: *Power handling: 100 watts RMS/140 watts max *VCdia: 2" *Le: .59 mH *Impedance: 8 ohms *Re: 7.07 ohms *Frequency response: 30-1,500 Hz *Fs: 33 Hz *SPL: 87 dB 1W/1m *Vas: 3.42 cu. ft. *Qms: 3.11 *Qes: 1.26 *Qts: .89 *Xmax: 5.0mm *Dimensions: A: 12", B: 11", C: 5-3/16".
Price=$45.16
Buy

Selenium DT150 Super Tweeter with 4"x4" Horn

Tue, 31 Mar 2009 17:12:08 -0600

The DT150 is a 1" phenolic dome compression driver specially designed to offer a smooth extended frequency response over a broad band, from mids to highs, with very high efficiency. Ideal for compact two- and three way systems which require uncompromising performance with high power output and superb frequency response. It also features a compact 4" x 4" ABS horn lens. * Power handling: 75 watts RMS/105 watts max (conservative, with recommended crossover at 4,000 Hz) * Voice coil diameter: 1" * Impedance: 8 ohms * Frequency response: 1,500-18,000 Hz * SPL: 107 dB 1W/1m * Dimensions: 4" W x 4" H x 4-3/4" D.
Price=$38.00
Buy

15" 2-Piece Steel Mesh Speaker Grill Black

Tue, 31 Mar 2009 17:11:54 -0600

Convenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Sold individually. Heavy duty expanded steel mesh design. Grill fits 15" speaker with a maximum outer diameter of 15-1/4". Overall diameter: 15-3/8".
Price=$9.00
Buy

OEM Systems Hi-Lo 8-Gang Decora Wallplate, Almond

Tue, 31 Mar 2009 17:11:53 -0600

Made just for the Hi-Lo J-Box! Custom 8-Gang Decora Cover Plate. Plastic cover for the Pro-Wire Series of HI-LO J Boxes. Shown with 8-Gang J-Box
Price=$9.94
Buy

Leviton 40756-BA QuickPort Decora Wall Plate Insert, 6-Port, Almond

Tue, 31 Mar 2009 17:11:52 -0600

QUICKPORT DECORA MULTIMEDIA INSERTS: Combine voice, data, audio and video in one compact, attractive Leviton Decora Quickport 6-Port Wallplate Insert. This Wallplate Insert offers designer style to match Leviton Decora electrical switches and outlets, with capacity and flexibility to support high-tech communications for boardrooms or workstations. QuickPort snap-in modules fit neatly into a single gang Decora wallplate and can be combined with other Decora devices (with a barrier box) in a multi-gang wallplate.
Price=$3.95
Buy

Celestion FTR Series 15IN. 1000W Subwoofer

Tue, 31 Mar 2009 17:11:51 -0600

Celestion FTR Series 15IN. 1000W Subwoofer
Price=$204.00
Buy

Sony CRU55SG11/R Colored Speaker Grille for Sony KDL-55XBR8 Televisions (Red)

Tue, 31 Mar 2009 17:11:50 -0600

Price=$129.99
Buy

NUTONE CPHT200 HOME THEATER WALL PANEL

Tue, 31 Mar 2009 17:11:49 -0600

SenSonic speakers and accessories set the standard for sound quality and reliability. Every SenSonic product is engineered in-house for unsurpassed performance and is built with premium materials and components for the purest sound possible. SenSonic offers a broad range of products - In-wall, ceiling, surface mount, indoor, outdoor speakers, subwoofers, volume controls, rough-in frames and accessories for whole-house music distribution and home theater application. SenSonic audio speakers can create mini-concert areas in any room or patio in a house, or they can transform an ordinary family room into a home-entertainment and home theater room. SenSonic Speakers are backed by a 5-year warranty. For connecting Front Main, Center, Rear Channel Speakers and Powered Subwoofer to the A/V Receiver Output terminals: Via speaker push type terminals which accept up to 14 AWG speaker wire Dimensions: 4-5/8" H x 4-9/16" W x 1-5/16" D Depth behind wall: Approximately 7/16" Standard double gang box mountable Color: Black
Price=$33.95
Buy

QSC - AD-ID8

Tue, 31 Mar 2009 17:11:48 -0600

Price=$97.00
Buy

Boston Acoustics - VRi580

Tue, 31 Mar 2009 17:11:48 -0600

8" in wall speaker (sold individually)
Price=$500.00
Buy

STRAP TYPE HANDLE

Tue, 31 Mar 2009 17:11:47 -0600

Plastic strap handle with steel reinforcement. Suitable for use on car cabinets, etc. 10-1/2" L x 7/8" W. Screws not included.
Price=$2.49
Buy

SoundEasy Loudspeaker Design Software USB Key

Tue, 31 Mar 2009 17:11:46 -0600

USB Port Security Key-- Now Shipping Version 15! Soundeasy is a comprehensive loudspeaker design package that will help you develop all aspects of your loudspeaker system, from enclosure alignment to crossover modeling. It is famous for its versatility and ability to model almost any loudspeaker system the designer can imagine. When used to its fullest, you can design a complete system from several sets of driver measurements. This is a very advanced program and is one of the most powerful design packages available at any price. Whether you are ready to step into the advanced features now, or several years down the road, this software will grow with you. Updated often, this program will always work with the latest operating systems and sound cards. Windows 2000 or XP (256MB minimum) are recommended to support the large number of calculations performed by this software. 1024 x 768 monitor resolution and included hardware key are required for operation. Full-duplex 16-bit soundcard required for EasyLab speaker measurement module. Note: This software is recommended for the advanced speaker builder due to the large number of variables and very complex nature of the content.
Price=$299.99
Buy

Bash 500W Digital Subwoofer Amplifier

Tue, 31 Mar 2009 17:11:29 -0600

BASH patented amplifier technology was developed to offer extreme amounts of power without the wasted heat and energy of traditional amplifier designs. Add to this an intelligent circuit design, and you get benefits such as extremely low distortion and high signal to noise ratios. The combination of clean output and high power makes the BASH amplifiers some of the best sounding subwoofer amplifiers on the market. Features: 50 to 150 Hz low-pass crossover, 0 degree or 180 degree phase, line level inputs, speaker level inputs, line outputs, master on/off switch, auto on. Specifications: 500 watts RMS @ .5%THD into 4 ohm load. Signal to noise ratio 105 dB A-weighted, Dimensions: 12" W x 8" H x 3-1/2" D.
Price=$399.99
Buy

Tan Automotive Carpet Yard 40" Wide

Tue, 31 Mar 2009 17:11:28 -0600

Parts Express stocks this premium unbacked automotive carpet in 9 colors. This nonwoven plush carpet is made of 100% solution dyed polyolefin fiber. It resists stains, soil, mildew, and sun fading. This carpet is ideal for use in car stereo installations. Use it to cover your custom speaker boxes and amp boards. Now your entire installation can be color coordinated to your car interior. 40" wide and sold by the linear yard. Made in the U.S.A.
Price=$5.19
Buy

Niles Audio 1-jack Wall Outlets for TV Cables White

Tue, 31 Mar 2009 17:11:28 -0600

dual (front and rear) female coaxial F-jacks * gold-plated jacks * fits standard single-gang junction box * white finish * warranty: 10 years *
Price=$9.99
Buy

Cast Frame 1/4"-20 Speaker Mounting Kit

Tue, 31 Mar 2009 17:11:27 -0600

Get that professional look with these black anodized hex head cap screws. The perfect mounting head for aluminum cast frame speakers. Large enough to secure the frame yet small enough to not deform paper and cork gaskets. Kit includes eight 1-1/2" thread length cap screws with 1/4-20 threads and eight self piercing spiked "T" nuts. Works well with up to 1" cabinet thickness.
Price=$2.95
Buy

Janus Extension Pocket, Black

Tue, 31 Mar 2009 17:11:26 -0600

A two-faced pocket, one side features loop fields for ID patches while the other side has PALS webbing to accept modular accessories. An adjustable and removable strap allows user to decide which side should face forward and whether the opening points to the left or right. Splices into 2÷ shoulder straps or waist straps using compatible quick release buckle components, providing additional storage for most customers or elongating a fully extended shoulder/waist strap for larger folks. Main: 8÷ x 4÷ x 1.5÷.
Price=$37.90
Buy

Dayton BR-1 6-1/2" 2-Way Monitor Kit Pair

Tue, 31 Mar 2009 17:11:25 -0600

This high-end 2-way monitor is based on the popular Dayton DC28F-8 1-1/8" silk dome tweeter and DC160-8 6-1/2" woofer. It was designed to provide a low cost, easy to build 2-way system for the speaker building novice. The end result is a kit that can be built in a couple of hours and has a sound that will rival systems costing two or three times its modest price! Overall, the system is smooth and detailed, with a wide soundstage that belies their smallish size. The tonal balance is on the warm side of neutral, which is pleasing with most types of music. The bass is also impressive for a system of this size. The cabinets are made of 5/8" MDF finished in an unobtrusive "black ash" vinyl laminate and include grills with black cloth. All driver holes are precision cut with a CNC for a perfect fit. The tweeter is flush mounted to reduce diffraction effects. Note: This system is offered in kit form and can be assembled in about two hours. The crossover needs to be assembled, so soldering skills are necessary. We've included a tutorial that thoroughly explains the theory and design process making this kit perfect for educational programs. Each kit includes everything needed to build one pair of speakers. System Specifications: • Impedance: 8 ohms • Frequency response: 43-18,000 Hz • SPL: 85 dB 2.83V/1m • Power handling: 100 watts max. • Cabinet dimensions: 14-1/4" H x 8-5/8" W x 11" D.
Price=$239.99
Buy

Gold Plated Banana 5-Way Speaker Terminal

Tue, 31 Mar 2009 17:11:24 -0600

Rectangular terminal with gold plated binding posts. Includes gasket for a leak free seal. Color coded. Accepts up to 10-12 gauge wire. Also can be used with dual banana plugs. Outside Dimensions: 2-1/8" x 15/16".
Price=$3.49
Buy

Tang Band W4-1658SB 4" Midbass Driver

Tue, 31 Mar 2009 17:11:23 -0600

This advanced midbass driver delivers performance rivaling that of much more expensive European speakers. The W4-1658SB features a polypropylene cone, rubber surround, long throw 2" voice coil, and shielded neodymium magnet, all housed in a durable plastic frame. Smooth, extended response, including a surprising amount of bass output. Specifications: Power handling: 45 watts RMS/90 watts max *VCdia: 2" *Impedance: 4 ohms *Re: 3.8 ohms *Frequency range: 55-6,000 Hz *Fs: 55 Hz *SPL: 87 dB 1W/1m *Vas: 0.26 cu. ft. *Qms: 8.84 *Qes: .41 *Qts: .39 *Xmax: 4.5 mm *Dimensions: A: 5.5", B: 4.5", C: 2.5".
Price=$85.99
Buy

Penn-Elcom F1687 Rubber Cabinet Foot 1-1/2" Dia. x 3/8" H

Tue, 31 Mar 2009 17:11:23 -0600

This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1-1/2" diameter x 3/8" thick. Mounting hardware not included. Sold individually.
Price=$0.98
Buy

QSC - HPR Cover 151

Tue, 31 Mar 2009 17:11:22 -0600

SOFT COVER MADE WITH WEATHER RESISTANT, HEAVY-DUTY NYLON/CORDURA MATERIAL FOR HPR151W/HPR151I
Price=$65.00
Buy

Penn-Elcom D0938K Dish Two 1/4" Jacks Black 4" x 4-3/8"

Tue, 31 Mar 2009 17:11:04 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Steel dish pre-punched for mounting two 1/4" phone jacks . Constructed of heavy-duty 1.2mm/.047" steel. Black powdercoat finish. Dimensions: 4" x 4.375". Mfg. #D0938K.
Price=$3.62
Buy

Penn-Elcom D028K Dish Two EP/NL4MR Black 5" x 7"

Tue, 31 Mar 2009 17:11:02 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Steel dish pre-punched for mounting two Cannon EP and/or Neutrik Speakon® NL4MPR/NL8MPR round panel mount connectors . Constructed of heavy-duty 1.2mm/.047" steel. Black powdercoat finish. Dimensions: 5" x 7". Mfg. #D028K.
Price=$8.03
Buy

4" BRAKED SWIVEL CASTER 250 LB. CAPACITY

Tue, 31 Mar 2009 17:11:01 -0600

The 3800 series of low-cost casters are perfect for equipment racks, bass bins, movie and soundstage equipment, or storage containers for the weekend band to the professional touring musician. Other applications include light-duty material handling equipment, food service carts & equipment, bakery racks & equipment, miscellaneous dollies, mobile cases, displays, mobile wire racking, stock carts, textile applications, warehouse & manufacturing applications, etc. Sold individually. • 4" Braked Swivel Caster • Overall height: 4-15/16" • Top plate: 2-1/2" x 3-5/8" • Bolt hole pattern: 1-3/4" x 2-7/8" slotted to 3" • Ball bearing
Price=$12.27
Buy

Niles Audio DPS-1

Tue, 31 Mar 2009 17:11:01 -0600

Amplifier / speaker A-B selector Dimensions - 10 1/8 W x 2 1/2 H x 5 7/16 D
Price=$85.00
Buy

Goldwood GW-208/8 8" OEM Woofer 8 Ohm

Tue, 31 Mar 2009 17:11:00 -0600

These low frequency OEM drivers are ideal for the customer who is looking for inexpensive replacement woofers. Each woofer features a treated paper ribbed cone, vented pole piece, moisture resistant poly foam surround, and stamped steel frame. Specifications:*Power handling: 100 watts RMS/200 watts max *Voice coil diameter: 1-1/2" *Le: .6 mH *Re: 7.3 ohms *Frequency response: 55-2,500 Hz *Magnet weight: 20 oz. *Fs: 53 Hz *SPL: 87.9 dB 1W/1m *Vas: .80 cu. ft. *Qms: 4.05 *Qes: 1.09 *Qts: .86 *Xmax: 3.5mm *Net weight: 3-1/4 lbs. * Dimensions: Overall Diameter: 8", Cutout Diameter: 7-1/8", Mounting Depth: 3-11/16", Magnet Diameter: 4", Magnet Height: 1-1/4".
Price=$16.68
Buy

#8 x 3/4" Deep Thread Pan Head Screws Black 100 Pcs.

Tue, 31 Mar 2009 17:11:00 -0600

These #8 x 3/4" sharp point, black oxide, Phillips pan head screws with coarse/deep threads are ideal for use with wood and MDF. Perfect for speaker building and driver mounting. 100 pcs. per package.
Price=$2.45
Buy

Goldwood GT-525 1" Soft Dome Tweeter

Tue, 31 Mar 2009 17:10:59 -0600

Specifications: *Power handling: 50 watts RMS/100 watts max *VCdia: 1" *Impedance: 8 ohms *Fs: 1000 Hz * Frequency response: 2,000 - 20,000 Hz *SPL: 92 dB 1W/1m *Dimensions: A: 4", B: 2-7/8", C: 1-1/8".
Price=$11.00
Buy

Goldwood GW-208/4 8" OEM Woofer 4 Ohm

Tue, 31 Mar 2009 17:10:59 -0600

These low frequency OEM drivers are ideal for the customer who is looking for inexpensive replacement woofers. Each woofer features a treated paper ribbed cone, vented pole piece, moisture resistant poly foam surround, and stamped steel frame. Specifications:* Power handling: 100 watts RMS/200 watts max * Voice coil diameter: 1-1/2" *Le: .4 mH *Re: 3.7 ohms * Frequency response: 55-2,500 Hz * Magnet weight: 20 oz. * Fs: 53 Hz * SPL: 90.8 dB 2.83W/1m * Vas: .80 cu. ft. * Qms: 4.50 * Qes: .85 * Qts: .70 * Xmax: 3.5 mm * Net weight: 3-1/4 lbs. * Dimensions: Overall Diameter: 8", Cutout Diameter: 7-1/8", Mounting Depth: 3-11/16", Magnet Diameter: 4", Magnet Height: 1-1/4".
Price=$16.68
Buy

Penn-Elcom C1823K Metal Cabinet Corner Black 3 Leg

Tue, 31 Mar 2009 17:10:59 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Protect your investment! This high quality cabinet corner features all steel construction and is perfect for your next P.A. speaker project. Manufactured by Penn Fabrication in the UK. * Description: Cabinet corner, 3 leg * Dimensions: 1.6" x 1.6" * Metal thickness: 0.9mm/.035" * Finish: Black * Mfg. #C1823K.
Price=$0.98
Buy

2-Post Speaker Tap for In-Wall Stereo Connections

Tue, 31 Mar 2009 17:10:57 -0600

Installing in-wall or in-ceiling stereo speakers requires running speaker cable through your walls to the ultimate speaker locations. But that doesn't mean there needs to be an unsightly hole in the wall behind your stereo. By installing the 2-Post Speaker Tap, you'll be able to send your connector from your audio output to a decorator-style wall outlet with two receptacles for your stereo speaker cables. Speakers and cables are not included.The 2-Post Speaker Tap's premium audio connectors are color coded for easy polarity identification. Screw stops on the connector ends prevent disassembly. No soldering is required to connect to speaker wire, and the 2-Post Speaker Tap even has receptacles for optional banana plugs.The 2-Post Speaker Tap fits into a standard designer two-gang wall plate (not included).
Price=$6.99
Buy

Scosche P80Mwf2I Mini Wafer Fuse (80 Amp)

Tue, 31 Mar 2009 17:10:45 -0600

SCOSCHE P80MWF2I Mini Wafer Fuse (80 amp) 80 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk; Mini Wafer Fuse (80 amp)
Price=$6.11
Buy

6 1/2" 2-Way Waterproof Speaker with Charcoal Integrated Grill/Frame

Tue, 31 Mar 2009 17:10:44 -0600

1" mylar tweeter with ferrofluid Full plastic encasement frame and integrated grill Resists moisture, temperature and shock Bulk packaging only
Price=$9.94
Buy

SPEAKER CIRCUIT BREAKER 1.5A 100W

Tue, 31 Mar 2009 17:10:42 -0600

Automatic resetting circuit breaker for speaker systems can be used for whole systems or individual components (tweeters for example). Thermally opens when power level reaches 200% of rated hold current for 5 seconds. Power levels ratings are estimated and given for a 8 ohm load. Dimensions: 1/2" x 3/8" x 3/4".
Price=$2.35
Buy

ROUND SPEAKER TERMINAL

Tue, 31 Mar 2009 17:10:42 -0600

Spring loaded, pushbutton terminal with polarity identification. Accepts up to 12 gauge wire. Overall size: 2-15/16" round; cutout: 1-7/8" round. Includes gasket.
Price=$1.18
Buy

#6 x 3/4" Deep Thread Pan Head Screws Black 100 Pcs.

Tue, 31 Mar 2009 17:10:41 -0600

These #6 x 3/4" sharp point, black oxide, Phillips pan head screws with coarse/deep threads are ideal for use with wood and MDF. Perfect for speaker building and driver mounting, especially smaller items such as midranges, tweeters, terminal cups and port tubes. 100 pcs. per package.
Price=$2.90
Buy

Port Tube 3" ID x 4-1/2" L

Tue, 31 Mar 2009 17:10:40 -0600

QSC - HPR Pole 26

Tue, 31 Mar 2009 17:10:40 -0600

35MM DIAMETER, 26' (660MM) SPEAKER POLE FOR USE WITH HPR152I
Price=$43.00
Buy

On-Q Decorator Strap (White) 6-Port

Tue, 31 Mar 2009 17:10:39 -0600

6-port decorator strap * features six openings for On-Q inserts or jacks * mounts on On-Q wall box or bracket with provided screws * warranty: 1 year *
Price=$1.09
Buy

RixPRO Ace HDMI Wall Plate Set with Dual Ports Straight / 90 Degree

Tue, 31 Mar 2009 17:10:38 -0600

Price=$23.00
Buy

Dayton VL218-CH Cherry Vinyl Laminate 2 ft. x 18 ft.

Tue, 31 Mar 2009 17:10:37 -0600

Dayton DC160S-4 6-1/2" Classic Shielded Woofer 4 Ohm

Tue, 31 Mar 2009 17:10:21 -0600

The Dayton Classic woofers are excellent as replacements or for new system design and construction. Their versatile set of parameters make them suitable for sealed or vented enclosure designs. With impressive bass performance and smooth overall response, they are popular in many DIY loudspeaker projects. Specifications: * Power handling: 50 watts RMS/75 watts max * VCdia: 1-3/8" *Le: .93 mH * Impedance: 4 ohms * Re: 3.3 ohms * Frequency range: 33-4,000 Hz *Fs: 38 Hz * SPL: 89.0 dB 2.83V/1m, 86 1W/1m * Vas: .77 cu. ft. * Qms: 3.45 * Qes: .40 * Qts: .36 * Xmax: 3.4mm * Dimensions: A: 6-1/2", B: 5-3/4", C: 3-1/2".
Price=$30.99
Buy

PRO-WIRE IWM-1P DECORATOR-STYLE 1-CONNECTOR PLATE (WHITE)

Tue, 31 Mar 2009 17:10:20 -0600

OEM SYSTEMS IWM-1P Decorator-Style 1-Connector Plate (White) 1-connector plate; White Decorator-Style 1-Connector Plate (White)
Price=$9.43
Buy

Atlona High-Quality Wall Plate For 1 Speaker

Tue, 31 Mar 2009 17:10:19 -0600

Speaker Wall Plate for 1 Speaker. This wall plate is designed for any installation that requires running wires in the walls and will work with any single gang box.
Price=$6.59
Buy

Penn-Elcom H1014K Extra Wide Strap Handle Black End Caps

Tue, 31 Mar 2009 17:10:17 -0600

Extra wide strap handle features a rubber grip with a flexible spring steel insert and heavy duty steel end caps. End caps are black in color. 10-1/4" overall length x 1-1/4" wide. Mfg. #H1014K.
Price=$3.38
Buy

HiVi M5a 5" Aluminum/Magnesium Midbass

Tue, 31 Mar 2009 17:10:16 -0600

* Extremely rigid Aluminum/Magnesium con * Specially made high-loss rubber surround * High power handling Kapton voice coil former * Air transparent spider * High density aluminum die-cast basket * Symmetric Motor Drive (SMD) technology.
Price=$37.10
Buy

Band-It Cherry Veneer 24" x 96" Paper-Backed

Tue, 31 Mar 2009 17:10:15 -0600

Band-It's premium Cherry veneer offers the quality and beauty that you would find on high-end speakers, but in a form factor that is cost effective and easy-to-apply. The paper backing allows the wood to bend without cracking, and makes the veneer easier to handle, trim, and glue. Just secure the veneer in place with contact cement or your choice of adhesives, and trim edges flush. Comes in convenient 2 ft. by 8 ft. rolls that have enough material for most smaller bookshelf speakers. If you've never worked with veneer before, this is a great opportunity to give it a try-- we're sure you will like the results!
Price=$47.99
Buy

iBlaster Cube

Tue, 31 Mar 2009 17:10:15 -0600

PORTABLE SOUND SYSTEM,
Price=$19.75
Buy

Chestnut Hill Sound CHS50002 George Grille Kit (Black)

Tue, 31 Mar 2009 17:10:14 -0600

Choose from different matching grill covers to suit GEORGE to fit your taste and room decor
Price=$29.00
Buy

OEM Systems In-Wall Mounted Stereo System

Tue, 31 Mar 2009 17:10:12 -0600

Get that great stereo system sound with an architecturally correct built-in wall unit! In wall stereo systems allow you to place a complete stereo system in the listening area and not take up valuable floor space. The system is ideal for permanent installation in homes, custom mobile homes, van conversions, RVs, or any other installation where space limitations become a factor. The system is a compact stereo system which incorporates an AM/FM tuner, CD player, preset EQ, auxiliary input, and two output system preamps which can drive up to 8 pairs of 8 OEM speakers! A full-function IR remote is also included with the system.
Price=$249.95
Buy

Tang Band W3-1364SA 3" Bamboo Cone Driver

Tue, 31 Mar 2009 17:10:11 -0600

Another Tang Band first, Bamboo fiber cones! A blend of paper and Bamboo fibers provides a perfect combination of light weight and self-damping. A neodymium motor with a copper ring reduces distortion even further. The result of these features is a smooth frequency response with a very natural, open sound. Specifications: Power handling: 12 watts RMS/25 watts max *VCdia: 3/4" *Impedance: 8 ohms *Re: 6.6 ohms *Frequency range: 105-20,000 Hz *Fs: 105 Hz *SPL: 86 dB 1W/1m *Vas: .07 cu. ft. *Qms: 2.48 *Qes: .77 *Qts: .59 *Xmax: .5 mm *Dimensions: A: 3-5/8", B: 3", C: 2".
Price=$34.99
Buy

Dayton MD132 Angled Metal Input Dish

Tue, 31 Mar 2009 17:10:03 -0600

A great input dish for serious pro sound speaker cabinets! Powder coated and formed steel shell is punched and drilled for dual "D" style connectors, including Neutrik Speakon® NL4MP. Takes the strain off of heavy cables by improving the angle of the connection; also permits near-zero clearance when using speakers near walls and other vertical surfaces. Dimensions: 5-1/2" W x 6-3/4" H x 2-1/4" D. Cutout dimensions: 4-1/4" W x 5-1/4" H. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$8.99
Buy

Dayton RS125S-8 5" Reference Shielded Woofer 8 Ohm

Tue, 31 Mar 2009 17:10:03 -0600

The Dayton Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofers feature a shielded motor system, black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, and solid aluminum phase plug. Specifications: * Power handling: 30 watts RMS/45 watts max * VCdia: 1" * Le: .72 mH * Impedance: 8 ohms * Re: 6.3 ohms * Frequency range: 70-4,000 Hz * Fs: 82 Hz * SPL: 86.5 dB 1W/1m * Vas: .13 cu. ft. * Qms: 3.31 * Qes: .67 * Qts: .56 * Xmax: 2.8mm * Dimensions: A: 4-15/16", B: 3-3/4", C: 3".
Price=$35.99
Buy

Dynamat Dynaxorb Eliminates back-wave noise and distortion Available in speaker or subwoofer kits Speaker kit, two 6" x 6" sheets

Tue, 31 Mar 2009 17:10:01 -0600

Two 6" x 6" sheets * 1/4" thick * advanced polymer squares
Price=$18.98
Buy

On-Q Recessed Gold F-type Connector (White)

Tue, 31 Mar 2009 17:10:00 -0600

On-Q part # WP3482-WH * recessed gold F-type connector for use in all On-Q keystone wall plates * recessed hex nut prevents jack rotation * warranty: 1 year *
Price=$3.95
Buy

Leviton 40807-I QuickPort Angled Wall Plate, 4-Port, Ivory

Tue, 31 Mar 2009 17:10:00 -0600

MULTIMEDIA ANGLED WALLPLATE: The Leviton Multimedia 4-Port Angled Wallplate comes with a designation kit / icon label sheet and a mounting screw kit.
Price=$6.95
Buy

HiVi D10G 10" Kevlar/Paper Woofer

Tue, 31 Mar 2009 17:09:59 -0600

* Rigid paper/ Kevlar (R) composite cone * Fatigue resistant treated foam surround * Shielded vented magnet system with oversized Neodymium magnet * Long-throw symmetrically driving motor structure * High density aluminum die-cast frame The D10G represents a design where the voice coil is positioned over an undercut central pole piece with a large thermally stabilized Neodymium magnet at the bottom and high energy ceramic magnet on top. The long-throw voice coil allows symmetric piston motion and substantial decreases inductance. The magnet structure is optimized using Finite Element Analysis resulting in a radical reduction of distortion. The cone is made from innovative paper/Kevlar(R) composite and is extremely stable under high stress conditions. The vented design, ensures effective and uniform cooling of a high temperature rated voice coil providing a dramatic increase in power handling. The D10G is excellent as a woofer for audiophile quality speaker systems and control monitors. It also can also be used as a high performance subwoofer. * Power handling: 150 watts RMS/ 215 watts max * Voice coil diameter: 4" * Voice coil inductance: 1.2 mH * Nominal impedance: 8 ohms * DC resistance: 6.5 ohms * Frequency response: 25-2,000 Hz * Fs: 25 Hz * SPL: 88 dB 1W/1m * Vas: 4.88 cu. ft. * Qms: 2.41 * Qes: .54 * Qts: .44 * Xmax: 8.3 mm * Dimensions: Overall Diameter: 11", Cutout Diameter: 10", Mounting Depth: 4-1/4".
Price=$114.10
Buy

SNAP-IN BLANK COVER (IVORY)

Tue, 31 Mar 2009 17:09:58 -0600

Uses this cover (available in White or Ivory) to cover unused openings in Leviton QuickPort brackets and plates. They easily unsnap from the bracket when the times comes to finish out the bracket or plate with a regular connector.
Price=$0.75
Buy

On-Q Single-Gang Wall Plate (White) 4-Port

Tue, 31 Mar 2009 17:09:58 -0600

4-port single-gang wall plate * features four openings for On-Q keystone connectors * mounts on On-Q wall box or bracket with provided screws * warranty: 1 year *
Price=$1.09
Buy

OEM Systems IW-3R1FGI 3 RCA and 1 F-Connector Combo Jack Plate (Ivory)

Tue, 31 Mar 2009 17:09:56 -0600

Cables To Go Premise Plus Keystone Jack Cat5e Yellow ( 03798 )

Tue, 31 Mar 2009 17:09:56 -0600

Cables To Go's Category 5e Keystone Jacks are designed for superior performance that meets or exceeds industry standard TIA/EIA 568-A-5 requirements. The keystone jack will balance signal transmission of insertion loss and crosstalk from 1 to 100 MHz. Jacks are available in 9 colors to match housing or allow color- coded designation port in compliance with TIA-606 requirements. The jacks are designed to work in conjunction with the Cables To Go wallplates and surface boxes or any standard keystone and angled multimedia wallplate or patch panel. Each keystone jack includes 110-type IDC straight-back termination with strain relief caps, and comes standard with 50 inch gold plating on the jack contacts.
Price=$9.94
Buy

Dayton SD215-PR 8" Passive Radiator

Tue, 31 Mar 2009 17:09:53 -0600

The new Dayton Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems. Specifications: * Fs: 21 Hz * Vas: 1.41 cu. ft. * Qms: 2.00 * Cms: .75 mm/N * Mms: 75 g * Rms: 5.0 kg/s * Sd: 194 sq. cm. * Xmax: 9mm * Dimensions: A: 8-1/2", B: 7-1/8", C: 2-1/4".
Price=$19.98
Buy

MartinLogan Color Kit for Ticket In-Wall Speaker - Paintable

Tue, 31 Mar 2009 17:09:51 -0600

Price=$55.00
Buy

Niles® Audio 3-jack Wall Outlet for TV and Phone Cables

Tue, 31 Mar 2009 17:09:49 -0600

two dual (front and rear) gold-plated female coaxial F-jacks, one phone jack * fits standard single-gang junction box * white finish * warranty: 10 years *
Price=$17.98
Buy

HDTrinity HDMI Single Outlet Wall Plate

Tue, 31 Mar 2009 17:09:48 -0600

The HDTrinity HDMI Single outlet wall plate adds that professionally installed look to any in-wall HDMI installation. Simple to install on any standard electrical box, the included Decora-style cover plate is detachable to allow installation onto any multiple gang Decora plate. Most in-wall installations require two of these wall plates - one at the TV and one at the signal source. For longer in-wall distances, look for HDTrinity's wall plate with the integrated signal booster to keep your HDMI signal strong and free of interference. One year warranty included.
Price=$19.98
Buy

1/4"-20 Hurricane Nuts 50 Pcs.

Tue, 31 Mar 2009 17:09:48 -0600

Leviton QuickPort Decora Plus - Modular insert - white - 2 ports

Tue, 31 Mar 2009 17:09:46 -0600

Decora Multimedia Inserts combine voice, data, audio and video in a designer style for high-tech communications. They are compatible with all standard Decora wallplates and Decora Plus snap-on wallplates with hidden mounting screws and standard NEMA openings.
Price=$3.95
Buy

Goldwood GW-8028 8" Butyl Surround Woofer 8 Ohm

Tue, 31 Mar 2009 17:09:46 -0600

Butyl rubber surrounds are superior to foam in two important ways. First, the butyl rubber resists moisture and will not dry rot, prividing years of service. Second, the rubber surround, due to its superior damping characteristics will greatly reduce cone break up and ensure low distortion. These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame. Specifications: *Power handling: 65 watts RMS/90 watts max *VCdia: 1-1/2" *Le: .28 mH *Impedance: 8 ohms *Re: 7.15 ohms *Frequency range: 35-2,500 Hz *Fs: 39 Hz *SPL: 85 dB 1W/1m *Vas: 1.39 cu. ft. *Qms: 4.07 *Qes: 1.23 *Qts: .94 *Xmax: 4.6mm *Dimensions: A: 8", B: 7-1/4", C: 3-5/8".
Price=$22.69
Buy

Penn-Elcom F1633 Rubber Cabinet Foot 1-1/8" Dia. x 1/2" H

Tue, 31 Mar 2009 17:09:46 -0600

This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1-1/8" diameter x 1/2" thick. Mounting hardware not included. Sold individually.
Price=$0.98
Buy

Dayton DC160-8 6-1/2" Classic Woofer

Tue, 31 Mar 2009 17:09:46 -0600

One of the main design goals at Dayton Loudspeaker is to create loudspeakers that can achieve high levels of performance at reasonable prices. Our import series of treated cone drivers are developing quite a reputation for having the best price/performance value available anywhere. Non-pressed treated paper cones, ASV voice coils, vented pole pieces, rubber surrounds, coated cloth dust caps, and excellent low frequency performance are just some of the features you'll find on these quality woofers. Specifications: * Power handling: 50 watts RMS/75 watts max * Voice coil diameter: 1-3/8" * Le: 2.34 mH * Impedance: 8 ohms * DC resistance: 6.7 ohms * Frequency response: 30-4,000 Hz * Magnet weight: 15 oz. * Fs: 34 Hz * SPL: 88 dB 1W/1m * Vas: .87 cu. ft. * Qms: 3.47 * Qes: .36 * Qts: .33 * Xmax: 3.15mm * Dimensions: Overall Diameter: 6-1/2", Cutout Diameter: 5-3/4", Mounting Depth: 3-3/16", Magnet Diameter: 4", Magnet Height: 1-3/16".
Price=$25.99
Buy

Boston Acoustics DSi480 (Pr) 2-Way In-Wall Speaker

Tue, 31 Mar 2009 17:09:44 -0600

These rectangular in-walls, with their "pincushion" baskets, offer the most bass from the smallest footprint. They employ our famous 1" Kortec® soft dome tweeter for smooth, natural high frequencies. Their subtle styling will blend with the most elegant decor
Price=$275.00
Buy

OEM Systems Pro-Wire Jack Plate (8 Solderless Binding Post), Almond

Tue, 31 Mar 2009 17:09:42 -0600

Price=$19.95
Buy

PROCO WP1009 (1) SPEAKON WALLPLATE SINGLE GANG

Tue, 31 Mar 2009 17:09:41 -0600

07 - 08 Toyota FJ Cruiser 10 Inch Perfect Fit Subwoofer Enclosure

Tue, 31 Mar 2009 17:09:40 -0600

Price=$369.99
Buy

Pioneer A30FU20-52F 12" Woofer

Tue, 31 Mar 2009 17:09:39 -0600

Ribbed paper cone with poly foam surround. Long throw voice coil design helps to deliver powerful bass output. Excellent woofer for low frequency amplification and reproduction. * Power handling: 60 watts RMS/120 watts max * Voice coil diameter: 1-1/2" * Impedance: 8 ohms * Frequency response: 30-2,500 Hz * Magnet weight: 20 oz. * Fs: 30 Hz * SPL: 95 dB 1W/1m * Vas: 10.21cu. ft. * Xmax: 2.4mm * Qms: 2.65 * Qes: .36 * Qts: .31 * Net weight: 5 lbs. * Manufacturer model number: A30FU20-52F * Dimensions: Overall Diameter: 12-1/8", Cutout Diameter: 10-7/8", Mounting Depth: 5-3/8", Magnet Diameter: 4-1/4", Magnet Height: 1-1/2".
Price=$42.38
Buy

Niles Audio AXP-1

Tue, 31 Mar 2009 17:09:38 -0600

Auxiliary input selector Dimensions = 5 1/8 W, 2 1/2 H, 5 7/16 D
Price=$74.98
Buy

Atlona High-quality Wall Plate for 2 Speakers

Tue, 31 Mar 2009 17:09:38 -0600

NEWA great product for custom applications. If you want to hide your speaker wires in the walls, it would be really hard to not use a wall plate. This wall plate features 24k gold plated binding posts. With this wall plate you can either tie up wires directly to the wall plate or use 4mm (banana) plugs for the rear entry. This wall plate supports 2 speakers. Compatible with any single gang box.
Price=$8.39
Buy

On-Q Decorator Wall Plate (White) Dual-gang plate

Tue, 31 Mar 2009 17:09:37 -0600

fits dual-gang wall boxes and brackets * attaches to any On-Q universal keystone connector * warranty: 1 year *
Price=$1.95
Buy

EMINENCE DESIGNER SPEAKER BOX DESIGN SOFTWARE

Tue, 31 Mar 2009 17:09:36 -0600

Eminence Designer is a state-of-the-art speaker enclosure design program for PCs running Windows 95, 98, NT4 or later. With Eminence Designer, box design is as easy at 1-2-3: 1. Enter the speaker parameters (for Eminence speakers, simply select the model; other speaker parameters can be entered manually). 2. Calculate the box volume and tuning. This is very easy with the help of the "Suggest" box. 3. Evaluate the performance with any of the nine graphs. It can take many hours solving complex equations manually with a calculator to design a box that will bring out the best bass response from a speaker. Eminence Designer can do this for you in seconds - it can even suggest a box for your speaker. Eminence Designer models closed, vented, bandpass and passive radiator boxes. It will print box drawings and graphs for a professional presentation. Eminence Designer is quick to learn and easy to use. When the program is first run, a "Welcome" window will appear to help you configure the program and to guide you through its illustrated online manual. System Requirements: Microsoft Windows 95, 98, NT4 or later and a compatible computer (IBM PC with a Pentium processor or equivalent) with at least 16 MB of RAM (32 MB recommended), 17-23 MB of free hard disk space and a CD-R compatible CD-ROM or DVD drive. The Arial and Symbol TrueType fonts must be installed (both fonts are a standard part of Windows).
Price=$79.95
Buy

Terminal Cup with Filter

Tue, 31 Mar 2009 17:09:35 -0600

Round input dish with attached filter circuit designed to equalize the Peerless India LKO-120WFF 5-1/4" full range driver. Compensates for a dip in the driver's midrange response—adds an approximately 6 dB boost centered at 1,800 Hz. Components include one 8.2 uF electrolytic capacitor, one 20 gauge 0.58 mH air core inductor, and one 8 ohm 7 watt resistor. 12" wire leads. Spring loaded, pushbutton terminal with polarity identification. Accepts up to 12 gauge wire. Overall size: 2-15/16" round; cutout: 1-7/8" round. Includes gasket. Buyout, limited quantities.
Price=$4.99
Buy

ICACSV75BK - Bulk Velcro Tie

Tue, 31 Mar 2009 17:09:34 -0600

ICACSV75BK - Bulk Velcro Tie- ICC bulk velcro tie- 75ft'- BlackICCICACSV75BK
Price=$35.94
Buy

Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H

Tue, 31 Mar 2009 17:09:32 -0600

This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1" diameter x 1" thick. Mounting hardware not included. Sold individually.
Price=$0.98
Buy

Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.

Tue, 31 Mar 2009 17:09:31 -0600

These round magnets are perfect for attaching speaker grills to cabinets. The powerful neodymium design will securely hold even the largest grill frames. To use, simply drill a 13/32" diameter hole approximately 3/16" deep in your cabinet and grill frame, then glue the magnet into place using a suitable adhesive or epoxy while observing proper polarity. Magnet dimensions: 0.395" diameter x 0.2" thick. Eight magnets per package, enough to attach one grill.
Price=$9.94
Buy

Oem Systems Company IW-3RG RCA Jack Plate (White)

Tue, 31 Mar 2009 17:09:31 -0600

Boston Acoustics - VRi793

Tue, 31 Mar 2009 17:09:30 -0600

In wall LCR High output 220w power (sold individually)
Price=$1600.00
Buy

1-1/2" Round Mini Speaker 8 Ohm

Tue, 31 Mar 2009 17:09:29 -0600

1-1/2" round, 8 ohm, 0.25 watt mini speaker. Paper cone, Alnico magnet. Unit comes with 3" wire lead attached. Suitable for general-purpose replacement. Made in Taiwan. Limited availability. Factory buyout. Specifications: Power handling: 0.15 watts RMS/0.30 watts max *Impedance: 8 ohms *Re: 7.54 ohms *Frequency range: 875-20,000 Hz *Fs: 875.5 Hz *SPL: 86.25 dB 1W/1m *Vas: 0.0009 cu. ft. *Qms: 1.064 *Qes: 6.402 *Qts: 0.913 *Dimensions: A: 1-1/2", B: 1-1/3", C: 11/16".
Price=$3.99
Buy

Penn-Elcom 5291 2" Swivel Caster

Tue, 31 Mar 2009 17:09:28 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Medium duty caster for rack cabinets, guitar cabinets and bass rigs. Heavy gauge zinc plated, pressed steel construction. 2" wheel and swivel roller bearings. Carrying weight: approximately 80 lbs. Mfg. #W0957. Sold individually.
Price=$4.72
Buy

QSC - I-282H

Tue, 31 Mar 2009 17:09:27 -0600

Price=$842.00
Buy

Goldwood GW-205/8S 5-1/4" Shielded Poly Woofer 8 Ohm

Tue, 31 Mar 2009 17:09:26 -0600

The poly-laminated paper cone, treated foam surround, and polymer dustcap give these drivers a very smooth frequency response with minimal cone breakup. The shielded magnet structure of this driver makes it great for A/V applications. *Power handling: 70 watts RMS/130 watts max *Voice coil diameter: 1" *Le: .4 mH *Impedance: 8 ohms *Re: 7.1 ohms *Frequency range: 80-6,000 Hz *Fs: 85 Hz *SPL: 87 dB 2.83V/1m *Vas: .18 cu. ft. *Xmax: 2.0 mm *Qms: 3.18 *Qes: 1.10 *Qts: .81 *Dimensions: Overall Diameter: 5-1/4", Cutout Diameter: 4-3/4", Mounting Depth: 3-1/8".
Price=$11.33
Buy

Two Conductor Speaker Terminal

Tue, 31 Mar 2009 17:09:26 -0600

Quick release, spring loaded terminal. Red/black polarity identification. Accepts up to 12 gauge wire. Outside Dimensions: 2-1/8" x 15/16".
Price=$0.98
Buy

Dayton HPSA1000 1000W Subwoofer Amplifier

Tue, 31 Mar 2009 17:09:25 -0600

One of the most technologically advanced subwoofer amplifiers on the market! This new subwoofer amplifier is based on state-of-the-art Class G circuit topology that combines the proven high power, high fidelity characteristics of a Class AB amplifier with a patented tracking down converter power supply to achieve an operating efficiency up to 86%. You get the efficiency of a Class D amplifier without compromising audio quality and reliability. The class AB output stage provides the clean and low-distortion sound that audiophiles demand, without any instability problems of other high-efficiency amplifier designs. This American designed and engineered amplifier uses patented circuitry that continuously tracks the input signal to modulate or control the voltage available to the output stage. This "tracking" capability delivers the exact amount of power based on demand instead of constantly keeping it in reserve, so the output stage only draws the amount of power that is required at any given time. This means less energy is wasted as heat, and more power is available for the subwoofer driver. Dimensions: 11-15/16" W x 11-15/16" H x 5-1/4" D. Cutout dimensions: 10" W x 10" H.
Price=$574.99
Buy

4 Post Speaker Wall Plate for 2 Speakers

Tue, 31 Mar 2009 17:09:23 -0600

Dayton HPSA500 500W Subwoofer Amplifier

Tue, 31 Mar 2009 17:09:22 -0600

Audax AP170Z0 6-1/2" Shielded Aerogel Midbass

Tue, 31 Mar 2009 17:09:21 -0600

The Polymer chassis combines strength, excellent damping qualities and environmental stability (humidity, temperature and shock). It also contains a built in cosmetic ring designed for front, rear and recessed mounting. Each unit features high loss rubber surround, high temperature voice coil and Audax's unique HD-A Aerogel cones. Specifications: * Power handling: 60 watts RMS/ 85watts max * Voice coil diameter: 1-3/16" * Voice coil inductance: .74 mH * Nominal impedance: 6.0 ohms * DC resistance: 5.3 ohms * Frequency response: 48-5,000 Hz * Magnet weight: 9 oz. * Fs: 48.5 Hz * SPL: 89.3 dB 2.83V/1m * Vas: .87 cu. ft. * Qms: 1.61 * Qes: .50 * Qts: .38 * Xmax: 3.0mm * Net weight: 2 lbs * Dimensions: Overall Diameter: 6-13/16", Cutout Diameter: 5-11/16", Mounting Depth: 3-1/8", Magnet Diameter: 3-3/4.
Price=$60.00
Buy

Dayton VL218-BT Black Textured Vinyl Laminate 2 ft. x 18 ft.

Tue, 31 Mar 2009 17:09:19 -0600

On-Q Single-Gang Wall Plate (White) 6-Port

Tue, 31 Mar 2009 17:09:19 -0600

6-port single-gang wall plate * features six openings for On-Q keystone connectors * mounts on On-Q wall box or bracket with provided screws * warranty: 1 year *
Price=$2.49
Buy

Leviton QuickPort Decora - Wall mount plate - ivory - 2 ports

Tue, 31 Mar 2009 17:09:18 -0600

Combine voice, data, audio and video in one compact, attractive Decora wallplate. QuickPort Decora Wallplate Inserts offer designer style to match Leviton Decora electrical switches and outlets, with the capacity and flexibility to support high-tech communications for boardrooms or workstations.
Price=$1.99
Buy

R/T 12" Steel Waffle Speaker Grill with Mounting Brackets and Screws

Tue, 31 Mar 2009 17:09:18 -0600

Protect your expensive woofers from serious damage with these heavy gauge steel grills with waffle mesh! Grills are black powder coated for long life and have heavy black vinyl surrounds! Comes with mounting brackets and screws.
Price=$7.99
Buy

Scosche P40Mwf2I Mini Wafer Fuse (40 Amp)

Tue, 31 Mar 2009 17:09:17 -0600

SCOSCHE P40MWF2I Mini Wafer Fuse (40 amp) 40 amp; Works with SISPDMWF2D, SISPDMWF4D and SISPMWFHI; Replacement fuses for wafer digital distribution blocks; 2-pk; Mini Wafer Fuse (40 amp)
Price=$4.54
Buy

Recessed Speaker Terminal Banana 5-Way Binding Posts

Tue, 31 Mar 2009 17:09:16 -0600

High current binding post design. Good for applications over 150 watts. Angled for easy access. Accepts up to 10-12 gauge wire. Can also be used with dual banana plugs. Overall size: 3-1/8" x 3-5/8"; cutout: 2-7/8" x 2-1/8". Includes gasket.
Price=$3.49
Buy

Eminence PX2:1K6 2-Way Crossover 1,600 Hz

Tue, 31 Mar 2009 17:09:15 -0600

Speaker Cabinet 3/8" Toe Spike Set 4 Pcs.

Tue, 31 Mar 2009 17:09:11 -0600

By rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system, it is possible to dramatically improve clarity, stereo imaging and tighten up the bass response. This is particularly effective on flimsy flooring and thick carpet. Includes 4 toes, 4 threaded inserts and 4 jamnuts. Requires 3/8" hole and 6 mm allen wrench for installation.
Price=$2.75
Buy

Sony CRU55SG11/N Colored Speaker Grille for Sony KDL-55XBR8 Televisions (Gold)

Tue, 31 Mar 2009 17:09:10 -0600

Price=$129.99
Buy

Niles ABA-1D In-wall speaker or amplifier selector Almond

Tue, 31 Mar 2009 17:09:10 -0600

in-wall speaker or amplifier selector * handles up to 350 watts per channel * accepts up to 14 gauge speaker wire * open-backed single-gang J-box or plaster ring required for installation (not included) * warranty: 10 years *
Price=$44.00
Buy

Dayton MH111 Steel Bar Handle

Tue, 31 Mar 2009 17:09:09 -0600

Rugged all-steel P.A. handle features a recessed steel bar handgrip and durable black powder coated finish. Industry-standard look and quality! Made of .035" steel, has ten 3/16" mounting holes for a solid, airtight fit. Dimensions: 6-3/8" W x 8-11/16" H x 2-1/2" D. Cutout dimensions: 4-3/8" W x 6-3/4" H. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$7.99
Buy

Dayton MH121 Surface Mount Flip Handle Black

Tue, 31 Mar 2009 17:09:08 -0600

Exterior mounted handle for speaker enclosures, racks, and road cases. Spring-loaded design with comfortable 5/8" diameter rubber grip. Heavy steel construction with satin black powder coat finish. Dimensions: Mounting plate: 5-1/2" W x 1-5/8" H, 3-1/4" total height including handle.
Price=$5.99
Buy

15" Economy Speaker Grill

Tue, 31 Mar 2009 17:09:07 -0600

Value priced grills are made of .7 mm thick medium duty steel mesh. Rubber edges reduce vibration and facilitate mounting. Sold individually. Mounting kits sold separately below.
Price=$7.60
Buy

Dayton RS100-4 4" Reference Full-Range Driver 4 Ohm

Tue, 31 Mar 2009 17:09:07 -0600

The Dayton Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, rubber magnet boot, and gold terminals. Specifications: * Power handling: 30 watts RMS/45 watts max * VCdia: 1" * Le: .67 mH * Impedance: 4 ohms * Re: 3.0 ohms * Frequency range: 80-20,000 Hz * Fs: 80 Hz * SPL: 87.2 dB 2.83V/1m, 84.2 dB 1W/1m * Vas: .07 cu. ft. * Qms: 3.10 * Qes: .57 * Qts: .48 * Xmax: 4mm * Dimensions: A: 3-7/8", B: 2-7/8", C: 2-1/16".
Price=$34.99
Buy

Sonic Immersion VT300 I-Beam Transducer

Tue, 31 Mar 2009 17:09:05 -0600

Experience High Definition Bass! The I BEAM™ transducer is the new world standard in vibro tactile performance. It delivers powerful deep bass and accurate broadband sound output that will improve the sound quality of any music or home theater system. Prepare to discover a new dimension of sound The I BEAM™ transducer creates sound through vibration transfer instead of pressuring the air around you. The energy is delivered so cleanly that the brain interprets the stimulus as Sound, not Shaking™. With an I BEAM™ transducer installed, you can experience High Definition Bass™. Includes I BEAM™, mounting screws and detailed instructions. Specifications: *Power handling: 100 watts RMS/250 watts max *Frequency range: 20-800 Hz *Impedance: 4 ohms *Force/Watt: 2.2lbs/watt (9.7 Newtons/Watt) *Dimensions: 6-1/2" L x 4-1/8" x W 2-3/4" H. Review at audioholics.com "The Sonic Immersion Technologies I BEAM VT-300 transducer is a remarkable product. Its powerful tactile performance, speed, and accuracy place this transducer among the finest we have evaluated to date....The I BEAM VT-300 is very efficient and doesn’t require a lot of power to generate huge amounts of vibro-tactile action.....The I BEAM VT-300 generated huge amounts of WOW effect and added another dimension to our home theater listening experience. By Ray Adkins (owner of RLA home theater and contributing staff writer) Read full review below
Price=$399.99
Buy

2-3/8" x 3-9/16" Mini Speaker 45 Ohm

Tue, 31 Mar 2009 17:09:04 -0600

2-3/8" x 3-9/16" oval mini speaker, 45 ohm nominal impedance. Great replacement for TV or computer speakers. Paper cone, Alnico magnet. Made in Taiwan. Limited availability. Factory buyout. Specifications: Power handling: 0.25 watts RMS/0.5 watts max *Impedance: 45 ohms *Re: 41.7 ohms *Frequency range: 330-12,000 Hz *Fs: 331.7 Hz *SPL: 84 dB 1W/1m *Vas: 0.02 cu. ft. *Qms: 10.28 *Qes: 12.04 *Qts: 5.547 *Dimensions: A: 2-3/8 x 3-9/16", B: 2-1/8 x 3-1/8", C: 1-1/8".
Price=$3.99
Buy

Audiovox Vh62 Single Coaxial Wall Plate (Ivory)

Tue, 31 Mar 2009 17:09:04 -0600

RCA VH62 Single Coaxial Wall Plate (Ivory) Fits standard electrical outlet box;or flush mount to drywall; Professionally install RG59 or RG6 coaxial cable ; Ivory Single Coaxial Wall Plate (Ivory)
Price=$8.64
Buy

Penn-Elcom C1824K Metal Cabinet Corner Black 2 Leg

Tue, 31 Mar 2009 17:09:00 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Protect your investment! This high quality cabinet corner features all steel construction and is perfect for your next P.A. speaker project. Manufactured by Penn Fabrication in the UK. * Description: Cabinet corner, 2 leg * Dimensions: 1.6" x 0.51" * Metal thickness: 0.9mm/.035" * Finish: Black * Mfg. #C1824K.
Price=$0.98
Buy

Pyle PPG630I 400W Battery Powered Guitar Amplifier with iPod Docking

Tue, 31 Mar 2009 17:08:59 -0600

iPod docking for connecting iPodRemote control for iPod " guitar input for wired connection " XLR combo mic inputBass mid treble and volume controls on guitar
Price=$235.22
Buy

Goldwood GM-35 5" Cone Midrange

Tue, 31 Mar 2009 17:08:58 -0600

Great general-purpose 5" sealed back midrange driver. Features a paper cone, treated paper surround, and black aluminum dust cap. Offers a smooth and extended response, and mates well with cone tweeters. * Power handling: 35 watts RMS/50 watts max * Nominal impedance: 8 ohms * Fs: 800 Hz * Frequency response: 1,500-10,000 Hz * Magnet weight: 3 oz. * SPL: 90 dB 1W/1m * Net weight: 1/2 lb. * Dimensions: Overall Diameter: 5-1/8", Cutout Diameter: 4-1/16", Mounting Depth: 1-5/8", Magnet Diameter: 2-5/16", Magnet Height: 1/2".
Price=$5.79
Buy

PORT TUBE TRIANGULAR

Tue, 31 Mar 2009 17:08:57 -0600

Triangular black plastic port tube is perfect for fine tuning bass alignment. Long side of triangle is curved so it can be mounted around the driver. Dimensions: 6" W x 2-3/4" H x 5" D.
Price=$2.75
Buy

Oem Systems Company IW-1RG RCA Jack Plate (White)

Tue, 31 Mar 2009 17:08:57 -0600

Cast Frame #10-32 Speaker Mounting Kit

Tue, 31 Mar 2009 17:08:56 -0600

Get that professional look with these black anodized hex head cap screws. The perfect mounting head for aluminum cast frame speakers. Large enough to secure the frame yet small enough to not deform paper and cork gaskets. Kit includes eight 1-1/2" thread length cap screws with 10-32 threads and eight self piercing spiked "T" nuts. Works well with up to 1" cabinet thickness.
Price=$2.95
Buy

2 Post Speaker Wall Plate for 1 Speaker

Tue, 31 Mar 2009 17:08:55 -0600

Put the finishing touch on home theatre and audio/video installations with these high quality audio wall plates.Unique easy to use design utilizes our installer friendly wall plates. All of our connectors incorporate a hex lock indent to eliminate connector "spin" and are gold plated for maximum conductivity and long life.All jacks are color coded for polarity identification and are isolated from the plate. Designed to work with Bare Wire or Banana Plugs Precision machined, gold plated binding posts Gold plated and color-coded for easy identification Fits standard electrical boxes or can be mounted to wall without a box with the included hardware Use with In-wall speaker wire up to 14AWG Easy to tighten thumb screw terminals Same connector on the front and back for easy and speed Run your speaker wires cleanly and neatly through your walls without the mess Perfect for Home Theater, Multimedia Classrooms and Conference Rooms
Price=$5.00
Buy

Boston Acoustics DSi485 (Pr) 2-Way Ceiling Mount Speaker

Tue, 31 Mar 2009 17:08:54 -0600

Regardless of the application, there's a DSi series in-ceiling speaker that delivers uncompromising Boston Sound. Best of all, there is a DSi speaker that will fit any audio budget, and you'll sacrifice nothing in the way of performance.
Price=$300.00
Buy

Niles 5W-8D Decora Faceplate - Wall plate - white

Tue, 31 Mar 2009 17:08:54 -0600

Niles' mission is to be the world's leading supplier of products that offer its customers innovative solutions for whole-house distribution and integration of audio/video systems while providing unparalleled quality, convenience, control, and value.
Price=$19.98
Buy

1" Soft Dome Tweeter 4 Ohm

Tue, 31 Mar 2009 17:08:53 -0600

Soft textile dome, four-hole plastic faceplate, waveguide loading, and a wafer-thin foam anti-diffraction ring. Similar to Philips/Norelco/Amperex tweeters from the early 1980s. 4 ohm impedance. Buyout, limited quantities. Specifications: *Power handling: 30 watts RMS/60 watts max *VCdia: 1" *Le: 0.03 mH *Impedance: 4 ohms *Re: 2.92 ohms *Frequency range: 2,500-20,000 Hz *Magnet weight: 8 oz. *Fs: 2,500 Hz *SPL: 91 dB 2.8V/1m *Dimensions: A: 3-1/8", B: 3", C: 1-1/8".
Price=$14.99
Buy

10" 2-Piece Steel Mesh Speaker Grill Black

Tue, 31 Mar 2009 17:08:49 -0600

Convenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Sold individually. Heavy duty expanded steel mesh design. Grill fits 10" speaker with a maximum outer diameter of 10-1/4". Overall diameter: 10-3/8".
Price=$10.25
Buy

Small Grill Guides 12 Pair

Tue, 31 Mar 2009 17:08:48 -0600

Ball and socket type grill guides for attaching speaker grill to cabinet. To use, simply drill the appropriate size holes in cabinet and grill frame. Both the male and female portions press-fit into their appropriate holes. 12 pair per package. Fits cabinet holes measuring 7/16" and grill frame holes measuring 3/8".
Price=$2.33
Buy

Band-It Red Oak Veneer 24" x 96" Paper-Backed

Tue, 31 Mar 2009 17:08:46 -0600

Band-It's premium Red Oak veneer offers the quality and beauty that you would find on high-end speakers, but in a form factor that is cost effective and easy-to-apply. The paper backing allows the wood to bend without cracking, and makes the veneer easier to handle, trim, and glue. Just secure the veneer in place with contact cement or your choice of adhesives, and trim edges flush. Comes in convenient 2 ft. by 8 ft. rolls that have enough material for most smaller bookshelf speakers. If you've never worked with veneer before, this is a great opportunity to give it a try-- we're sure you will like the results!
Price=$47.99
Buy

Band-It Black Melamine 24" x 96" Iron-On

Tue, 31 Mar 2009 17:08:45 -0600

Band-It's black textured melamine facing is an excellent choice when you need a durable, attractive finish for your loudspeakers. The material is very flexible, and offers a textured finish that is very wear-resistant. An iron-on adhesive allows it to adhere very well to just about any substrate, including metal and MDF end grain. Simply cut your pieces a bit oversized, iron melamine to secure, and trim edges with the Band-It edge trimmer or utility knife. Sold in 2 ft. by 8 ft. rolls.
Price=$31.55
Buy

Oem Systems Company IW-4FG F Connector Jack Plate (White)

Tue, 31 Mar 2009 17:08:45 -0600

Dayton DSS4-BK Black Speaker Spike Set 4 Pcs.

Tue, 31 Mar 2009 17:08:43 -0600

By rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system, it is possible to dramatically improve clarity, stereo imaging and bass response. This is very apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable black finish. Each cone spike weighs 86 grams and measures 1-1/4" diameter and 1-1/2" tall. The two piece threaded tip design allows for precise level adjustment. T-nuts and threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes 4 black cone spikes, 4 black floor discs, 4 T-nuts and 4 threaded studs.
Price=$33.99
Buy

R/T 8" Steel Waffle Speaker Grill with Mounting Brackets and Screws

Tue, 31 Mar 2009 17:08:43 -0600

Large Corner Grill Frame Kit

Tue, 31 Mar 2009 17:08:42 -0600

Now you can make custom speaker grills with these interlocking grill frame kits. Available in small corner and large corner, the small corner kit is perfect for bookshelf or tower cabinets and the large corner kit comes with a cross brace and is great for larger cabinets. Each frame is made of sturdy ABS plastic and can make grills up to 36" square. Comes complete with frame rails, corners, and grill guides, you just cut to size, assemble, glue and apply grill cloth. Requires a 5/8" hole in baffle for grill guide socket. Sold individually. Corner kits (4 pcs) are also available separately allowing two smaller frames to be made from a single kit.
Price=$19.98
Buy

Dayton HDSG-10 Heavy Duty 10" Speaker Grill

Tue, 31 Mar 2009 17:08:42 -0600

Provide your expensive speakers with the best protection. Dayton Professional HDSG Series 10" grills are the ultimate defense against feet, mic stands, and flying bottles. Powder coated 1.2 mm steel is punched, shaped, and trimmed with a vibration-dampening vinyl trim ring, ensuring years of service. Easily attach with accessory clamp kit, sold separately.
Price=$12.99
Buy

Dayton DC200-8 8" Classic Woofer

Tue, 31 Mar 2009 17:08:41 -0600

One of the main design goals at Dayton Loudspeaker is to create loudspeakers that can achieve high levels of performance at reasonable prices. Our import series of treated cone drivers are developing quite a reputation for having the best price/performance value available anywhere. Non-pressed treated paper cones, ASV voice coils, vented pole pieces, rubber surrounds, coated cloth dust caps, and excellent low frequency performance are just some of the features you'll find on these quality woofers. Specifications: * Power handling: 60 watts RMS/85 watts max * Voice coil diameter: 1-3/8" * Le: 2.36 mH * Impedance: 8 ohms * Re: 6.4 ohms * Frequency response: 29-3,000 Hz * Magnet weight: 15 oz. * Fs: 31 Hz * SPL: 88 dB 1W/1m * Vas: 1.78 cu. ft. * Qms: 2.96 * Qes: .47 * Qts: .40 * Xmax: 4.5mm * Dimensions: Overall Diameter: 8-1/16", Cutout Diameter: 7-5/16", Mounting Depth: 3-3/4", Magnet Diameter: 4", Magnet Height: 1-1/4".
Price=$29.99
Buy

Band-It Mahogany Veneer 24" x 96" Paper-Backed

Tue, 31 Mar 2009 17:08:37 -0600

Band-It's premium Mahogany veneer offers the quality and beauty that you would find on high-end speakers, but in a form factor that is cost effective and easy-to-apply. The paper backing allows the wood to bend without cracking, and makes the veneer easier to handle, trim, and glue. Just secure the veneer in place with contact cement or your choice of adhesives, and trim edges flush. Comes in convenient 2 ft. by 8 ft. rolls that have enough material for most smaller bookshelf speakers. If you've never worked with veneer before, this is a great opportunity to give it a try-- we're sure you will like the results!
Price=$47.99
Buy

Penn-Elcom L0925K Butterfly Latch Surface Mount Black

Tue, 31 Mar 2009 17:08:36 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Superb quality butterfly latch for a variety of cabinet applications. Manufactured by Penn Fabrication in the UK. * Construction: 1.2mm/.047" steel * Description: Large surface mount butterfly latch (no dish) * Dimensions: 3" x 4.80" * Color: Black * Mfg. #L0925K.
Price=$9.83
Buy

Dayton SG1828-8R Formed Metal Grill Pair

Tue, 31 Mar 2009 17:08:35 -0600

8 mm round hole, 18" x 28" x 1" grill. Dayton Professional formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets. The black powder coated 1.2 mm steel is punched in your choice of three hole patterns: 6 mm round (6R), 8 mm round (8R), and 8 mm square (8S). Each hole pattern is available in four finished grill sizes: 12" x 18", 15" x 22", 18" x 28", and 22" x 30". A carefully formed 1" bend on each edge provides extra strength to the grill, as well as creating a convenient mounting "stand off" for many installations. Additionally, each hole pattern is available in a 22" x 30" utility "flat" version (no bends), which can be used as is or custom cut by the user. Available in sizes to fit most 8", 10", 12", 15", and 18" speakers. Note: due to variations in the metal forming process, published dimensions are nominal and should be considered "approximate". Actual grill size could vary from stated dimensions by up to 1/2". Suggested applications: 10" 2-way with horn: 12" x 18" grill 12" 2-way with horn: 15" x 22" grill 15" 2-way with horn: 18" x 28" grill 15" 3-way with cone mid and horn: 22" x 30" grill 18" single driver subwoofer: 22" x 30" grill 2 x 12" guitar cabinet: 18" x 28" grill
Price=$45.99
Buy

OEM Systems IW-2R1FG 2 RCA and 1 F Connector Combo Jack Plate (White)

Tue, 31 Mar 2009 17:08:35 -0600

Goldwood GW-206/8 6-1/2" OEM Woofer 8 Ohm

Tue, 31 Mar 2009 17:08:34 -0600

These low frequency OEM drivers are ideal for the customer who is looking for inexpensive replacement woofers. Each woofer features a treated paper ribbed cone, vented pole piece, moisture resistant poly foam surround, and stamped steel frame. Specifications:* Power handling: 90 watts RMS/180 watts max * Voice coil diameter: 1-1/2" *Le: .5 mH *Re: 7.1 ohms * Frequency response: 60-3,000 Hz * Magnet weight: 20 oz. * Fs: 62.5 Hz * SPL: 87.3 dB 1W/1m * Vas: .40 cu. ft. * Qms: 3.13 * Qes: .97 * Qts: .75 * Xmax: 3.5 mm * Net weight: 3 lbs. * Dimensions: Overall Diameter: 6-1/2", Cutout Diameter: 5-5/8", Mounting Depth: 3-5/16", Magnet Diameter: 4", Magnet Height: 1-1/4".
Price=$15.34
Buy

#8 x 1/2" Self-Tapping Truss Head Screws 100 Pcs.

Tue, 31 Mar 2009 17:08:34 -0600

Black oxide hardware perfect for car stereo or electronic applications.
Price=$2.49
Buy

Leviton 80431-W Triple-Gang Combination Wall Plate (2 Decora/1 Toggle), White

Tue, 31 Mar 2009 17:08:33 -0600

The Leviton 2 Decora/GFCI and 1 Toggle Combination Wallplate is perfect for your decorative style switches and receptacles. This Wallplate comes with color matched metal mounting screws.
Price=$6.95
Buy

2-Way 3 1/2" Wall-Mountable Satellite Speakers

Tue, 31 Mar 2009 17:08:31 -0600

Advanced titanium-laminate-dome tweeter and 3-1/2 midrange driver for unsurpassed power Maximum recommended amplifier power of 100 Watts Impedance 8 Ohms nominal Frequency response 110Hz ? 20kHz (?6dB Available in convenient pair packs allowing you to easily expand your system to 7-channels Includes wall brackets
Price=$228.99
Buy

Phoenix Gold RIght Angle Terminal HDMI Wall Plate (Female)

Tue, 31 Mar 2009 17:08:31 -0600

PRODUCT FEATURES:Space-saving external (90 degree) right angel outputInternal pigtail provides maximum flexibilityFemale termination for direct inputInternal UL CL3 rated pigtailCable and connector certified HDMI1.3a
Price=$20.99
Buy

Leviton 4164700-W Decora HDMI Connector, Ivory

Tue, 31 Mar 2009 17:08:29 -0600

HIGH DEFINITION MULTIMEDIA INTERFACE A/V CONNECTOR: The Leviton HDMI Connector is used for High Definition video. It has female-to-female connectors for easy installation and is mounted in Decora Inserts for flexibility in configurations. This Connector allows for a cleaner install with in-wall wiring.
Price=$27.95
Buy

NEC Soundbar 70 Speaker Attachment for LCD1970NX-BK and LCD2070NX-BK Monitors (Black)

Tue, 31 Mar 2009 17:08:25 -0600

As the world reinvents itself, your challenge is to explore it. There are countless new ways to work. New ideas to share. New things to see. NEC-Mitsubishi Electronics Display helps you interact more dynamically within this changing world.The MultiSync Soundbar 70 takes care of the appropriate acoustic aspects.
Price=$75.98
Buy

HiVi B3S 3" Shielded Aluminum Driver Square Frame

Tue, 31 Mar 2009 17:08:23 -0600

Aluminum alloy concave cones and square frames are the distinguishing features of the BS series. Magnetically shielded design allows use in center channel and other multimedia applications. Stamped steel frame and rubber surround. Specifications: *Power handling: 15 watts RMS/30 watts max *VCdia: 3/4" *Znom: 8 ohms *Re: 6.5 ohms *Frequency range: 300-15,000 *Fs: 80 Hz *SPL: 81dB 1W/1m *Vas: .06 cu. ft. *Qms: 4.29 *Qes: 1.19 *Qts: .93 *Xmax: 3 mm *Dimensions: Overall Diameter: 3", Cutout Diameter: 2-3/4", Mounting Depth: 2-1/8".
Price=$19.98
Buy

Dayton DSS4-CH Chrome Speaker Spike Set 4 Pcs.

Tue, 31 Mar 2009 17:08:22 -0600

By rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system, it is possible to dramatically improve clarity, stereo imaging and bass response. This is very apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable chrome finish. Each cone spike weighs 86 grams and measures 1-1/4" diameter and 1-1/2" tall. The two piece threaded tip design allows for precise level adjustment. T-nuts and threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes 4 chrome cone spikes, 4 chrome floor discs, 4 T-nuts and 4 threaded studs.
Price=$33.99
Buy

Wall Mount Kit for All-in-one Surround Sound Bar

Tue, 31 Mar 2009 17:08:20 -0600

Wall Mount Kit for ESP101 All-in-one Surround Sound Bar
Price=$14.99
Buy

GOLD PLATED BI-AMP TERMINAL

Tue, 31 Mar 2009 17:08:19 -0600

Recessed mount speaker terminal with 2 pair of gold plated binding posts. Perfect for speakers that utilize a separate amp for woofer and tweeter. Gold plated bridging bars included for conventional applications. Also ideal for dual voice coil subwoofer input and output terminals. Accepts up to 10-12 gauge wire. Can also be used with dual banana plugs. Overall size: 4-13/16" x 3-3/4"; cutout: 3-7/8" x 3". Includes gasket.
Price=$5.90
Buy

Leviton 689-T Recessed Duplex Receptacle, 1 Gang, Light Almond

Tue, 31 Mar 2009 17:08:18 -0600

IDEAL FOR WALL-MOUNTED TVs, ENTERTAINMENT CENTERS AND MONITORS: The Leviton Recessed Duplex One-Gang Receptacle supplies AC power to two components, such as a flat panel TV and video receiver. It is flush-mounted to install invisibly behind wall units, wall-mounted Flat Panel TVs and signature artwork and has the wallplates built in. This Duplex Receptacle offers a UL/CSA approved, code-compliant solution providing two 15A/125VAC NEMA 5-15R power outlets.
Price=$10.95
Buy

Port Tube 2-1/16" ID x 5" L

Tue, 31 Mar 2009 17:08:17 -0600

Dayton PC123-16 Plastic Stacking Corner 16 Pcs.

Tue, 31 Mar 2009 17:08:16 -0600

These popular plastic corners give your cabinets great looks and protection. Molded-in "chevrons" provide a stylish look, as well as interlocking to help prevent slippage when used with same-sized cabinets. Dimensions: 2-1/8" H x 2-1/8" W x 3-1/4" D. Sold in convenient packages of 16 corners each. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$9.99
Buy

True Audio WinSpeakerz Speaker Design Software

Tue, 31 Mar 2009 17:08:15 -0600

Now you can build great sounding loudspeakers that you might pay hundreds or even thousands of dollars for at an audio salon! WinSpeakerz® is a loudspeaker simulation program for Windows 95/98/ME/NT/2000/XP. This popular speaker simulator lets you propose various speaker systems and then evaluate them in software before you cut wood or order expensive transducer components. Besides enclosure simulation, WinSpeakerz® supports speaker builders with various box and crossover calculators to see your projects to completion. Impedance compensators and tweeter attenuators can also be designed quickly. Just enter a few parameters and the component values are calculated as you type.
Price=$79.00
Buy

Steren White HDMI And Component Video Designer Style Wall Plate

Tue, 31 Mar 2009 17:08:15 -0600

Price=$18.95
Buy

OEM Systems Pro-Wire Combination Jack Plate (1 F-Coax, 2 RJ-45), White

Tue, 31 Mar 2009 17:08:12 -0600

Price=$15.95
Buy

JobSite WP-4/5W Four-Connector Wallplate System

Tue, 31 Mar 2009 17:08:12 -0600

PRODUCT FEATURES:A great alternative to dangling wires, this attractive wall plate adds that "finishing-touch" to your installations5-way binding posts offer maximum hook-up flexibilityGold-plating ensures long life and freedom from corrosionSolderless connectors make wiring a snap
Price=$13.58
Buy

Dayton VL218-BA Black Ash Vinyl Laminate 2 ft. x 18 ft.

Tue, 31 Mar 2009 17:08:11 -0600

Boston Acoustics DSi255 (Pr) 2-Way Ceiling Mount Speaker

Tue, 31 Mar 2009 17:08:10 -0600

5.25" in ceiling speaker (sold individually)
Price=$75.00
Buy

Ziotek 3 Speaker Set with Subwoofer, Black

Tue, 31 Mar 2009 17:08:08 -0600

This powered 3-speaker system is simple to setup and use with any computer , TV or boom-box with a 3.5mm output jack. and it's perfect for the value conscious consumer. Add a little punch to your gaming or listen to your MP3s while you surf the web.
Price=$12.99
Buy

Penn-Elcom M1500 Double 1/4" Jack Plate

Tue, 31 Mar 2009 17:08:08 -0600

Square plate with two 7/16" holes. Perfect for use with 1/4" phone jacks. 1-3/4" x 2-3/8" recessed area. 3" diameter hole required for mounting. 3/8" deep. Jacks not included. Overall size: 3-3/8" x 3-3/8"; cutout: 3" round.
Price=$1.50
Buy

George CHS30001 Cherry Wood Upgrade Kit

Tue, 31 Mar 2009 17:08:07 -0600

Price=$99.00
Buy

VIFA D75MX-41-08 3" TEXTILE DOME MIDRANGE

Tue, 31 Mar 2009 17:08:06 -0600

Superb ferro fluid cooled 3" textile dome midrange provides very smooth, natural sound with excellent on and off axis response. Features a precoated textile dome, low moving mass, internal ferrite magnet, and very linear impedance. * Power handling: 80 watts RMS/115 watts max * Nominal impedance: 8 ohms * DC resistance: 5.9 ohms * Frequency range: 700-6,000 Hz * Magnet weight: 8.5 oz. * Fs: 350 Hz * SPL: 92 dB 1W/1m * Dimensions: Overall Diameter: 5-15/16", Cutout Diameter: 4-9/16", Mounting Depth: 1-3/16", Magnet Diameter: 3-5/8", Magnet Height: 5/8".
Price=$49.99
Buy

Leviton 689-E Recessed Duplex Receptacle, 1 Gang, Black

Tue, 31 Mar 2009 17:08:05 -0600

Dayton RS180S-8 7" Reference Shielded Woofer 8 Ohm

Tue, 31 Mar 2009 17:08:04 -0600

The Dayton Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofers feature a shielded motor system, black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, and solid aluminum phase plug. Specifications: * Power handling: 60 watts RMS/90 watts max * VCdia: 1.5" * Le: .86 mH * Impedance: 8 ohms * Re: 6.4 ohms * Frequency range: 40-2,200 Hz * Fs: 44 Hz * SPL: 87.6 dB 1W/1m * Vas: .76 cu. ft. * Qms: 1.91 * Qes: .58 * Qts: .45 * Xmax: 6mm * Dimensions: A: 7-1/8", B: 5-3/4", C: 3-5/8".
Price=$53.99
Buy

Dual Female In HDmi Wall Plate

Tue, 31 Mar 2009 17:08:01 -0600

2 dual (front and rear) female HDMI terminals * internal pigtails for installation flexibility * external output angled 90° * HDMI version 1.3a * UL-CL3 rated for in-wall use * open-backed single-gang J-box or plaster ring required for installation (not included) *
Price=$28.99
Buy

Dayton PH113 Round Plastic Handle

Tue, 31 Mar 2009 17:08:00 -0600

Unique round handle requires simple round cutout for easy installation. Durable lightweight two-piece plastic construction. Removable plate on handle bar for name plate or logo. Dimensions: 7-3/8" W x 2-3/4" D. Cutout dimensions: 5-7/8" diameter. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$5.99
Buy

Dayton PH114 Plastic Pocket Handle 4-Sided

Tue, 31 Mar 2009 17:07:59 -0600

Practical handle for touring-style speaker systems or floor monitors that get lifted from all angles. Comfortable molded-in handgrips relieve the strain of picking up heavy enclosures. Durable lightweight two-piece ABS plastic construction, round cutout for easy installation. Dimensions: 6-1/8" W x 6-1/8" H x 2-1/2" D. Cutout dimensions: 5-3/4" diameter. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$4.99
Buy

Dayton PH115 Large Plastic Handle

Tue, 31 Mar 2009 17:07:58 -0600

Modern, stylish, recessed cabinet handle adds a sleek, high tech look to your speaker system. Durable lightweight two-piece plastic construction, removable insert on grip permits addition of user's own label or logo. Dimensions: 6-1/4" W x 9-1/2" H x 2-1/2" D. Cutout dimensions: 4-3/8" W x 7-1/2" H. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$4.99
Buy

Aurum Cantus AC-250F1 10" Woofer

Tue, 31 Mar 2009 17:07:57 -0600

Aurum Cantus midwoofers feature high-performance cone materials, long-excursion designs, and high quality construction. The AC-250F1 utilizes a carbon and mica composite polymer cone for a smooth frequency response. A long-throw motor design and vented motor structure provide great bass extension in ported enclosures. Specifications: *Power handling: 200 watts RMS/250 watts max *VCdia: 2" *Le: .62 mH *Impedance: 8 ohms *Re: 7.0 ohms *Frequency range: 21-3,000 Hz *Fs: 21 Hz *SPL: 90.0 dB 2.83V/1m *Vas: 5.58 cu. ft. *Qms: 3.68 *Qes: .37 *Qts: .33 *Xmax: 8 mm *Dimensions: A: 10-15/16", B: 9-3/8", C: 4-1/2".
Price=$124.99
Buy

HDmi Repeater Wall Plate

Tue, 31 Mar 2009 17:07:56 -0600

PRODUCT FEATURES:Perfect for wall mounted flat-panel LCD/Plasma TVs over long distancesEasily connect HDMI cables for extended length in-wall cable routingDelivers high-bandwidth, uncompressed video and multi-channel digital audio between HDMI compliant devices including DVD player/recorders, set-top boxes and Digital TVsVirtually doubles the length of digital video transmission capability (25 meters + 25 meters)Provides the highest resolution possible even over long distancesNo power supply neededSupports high resolution display up to 1080pHDCP compliant90 degree internal connector orientation allows vertical (upward or downward) cable in-wall routing to minimize cable bendHDMI female to HDMI female ports
Price=$68.37
Buy

Selenium ST350 Super Tweeter

Tue, 31 Mar 2009 17:07:55 -0600

Very efficient super tweeter designed to be used in high-frequency sound reinforcement. Recommended for large rooms, clubs, auditorium, theaters, and any other environment requiring smooth, well-controlled high frequency response. Specifications: *Power handling: 75 watts RMS/150 watts program (above 5,000 Hz) *Dispersion: 50° H x 50° V *VCdia: 1.6" *Impedance: 8 ohms *Frequency response: 2,500-20,000 Hz *SPL: 111 dB 1W/1m *Magnet weight: 16.5 oz. *Dimensions: 5.12" H x 4.76" W x 3.86" D. *Weight: 3.13 lbs.
Price=$46.00
Buy

Dayton PH116 Plastic Bar Handle

Tue, 31 Mar 2009 17:07:54 -0600

Oval/rectangular semi-recessed handle for all types of speaker enclosures. Two-piece plastic construction is light but strong, plastic dish provides an airtight seal. Dimensions: 6-7/8" W x 5-15/16" H x 2-1/2" D. Cutout dimensions: 5-3/8" W x 4-1/8" H. Dayton Professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Professional...superb performance at a great price!
Price=$4.99
Buy

Atlona High-Quality Wall Plate For 2 Speakers

Tue, 31 Mar 2009 17:07:53 -0600

Speaker Wall Plate for 2 Speakers. This wall plate is designed for any installation that requires running wires in the walls and will work with any single gang box.
Price=$9.89
Buy

Ernie Ball 4795 4 Pack Amp Speaker Cabinet Casters

Tue, 31 Mar 2009 17:07:52 -0600

Set of 4, standard plate mount. 2" diameter x 7/8" Ruberex wheel, double ball bearing, split-level, nickel-plated steel construction offers superior swiveling and weight dispersion. Each caster comes complete with four 14-1 round head phillips wood mounting screws. Maximum recommended weight is 70 lbs per caster.
Price=$28.00
Buy

Pioneer FD10DP61-06F 5" Cone Midrange

Tue, 31 Mar 2009 17:07:49 -0600

Paper cone with poly foam surround. Sealed back midrange with strontium magnet structure. Ferro fluid cooling provides maximum heat dissipation and increased power handling capability. Low distortion and high linearity for excellent reproduction of midrange frequencies. * Power handling: 50 watts RMS/75 watts max * Voice coil diameter: 3/4" * Impedance: 8 ohms * Frequency response: 700-7,000 Hz * Magnet weight: 3.7 oz. * SPL: 92 dB 1W/1m * Net weight: 1 lb. * Manufacturer model number: FD10DP61-06F. * Dimensions: Overall Diameter: 5-1/8", Cutout Diameter: 4-1/8", Mounting Depth: 2-1/4", Magnet Diameter: 2-3/8", Magnet Height: 3/4".
Price=$9.25
Buy

Leviton 40816-BW Sectional Wall Plate, 6-Port QuickPort End Section, White

Tue, 31 Mar 2009 17:07:48 -0600

Consolidate your computer, telephone and high-speed data networks in a single wall plate assembly with these QuickPort Snap-Together Sectional Wall Plates! They work with standard Snap-In QuickPort Jacks and allow you to customize any jack combinations you need.Looking for a Quickport snap-together center section? These panels will snap onto any of the other Leviton Snap On plates for 120-volt devices. Choose two end panels for 2-gang trim plates, or add as many center 120-volt panels as you need for 3-gang trim plates or higher. These plates are available in 3-, 4- and 6-port versions, in white or ivory. Mounting screws included.
Price=$2.49
Buy

Blank White Cover Wall Plate

Tue, 31 Mar 2009 17:07:47 -0600

Blank White Cover Wall Plate
Price=$1.05
Buy

Channel Vision G-ICDW Cable Port Wall Plate

Tue, 31 Mar 2009 17:07:46 -0600

cable Port Wall Plate
Price=$10.34
Buy

HDmi 2-PORT Wall Plate

Tue, 31 Mar 2009 17:07:45 -0600

PRODUCT FEATURES:Perfect for wall mounted flat-panel LCD/Plasma TVsEasily connect HDMI cables for in-wall cable routingDelivers high-bandwidth, uncompressed video and multi-channel digital audio between HDMI compliant devices including DVD player/recorders, set-top boxes and Digital TVsSupports high resolution display up to 1080p2 HDMI female to HDMI female ports
Price=$30.32
Buy

Set of 16 SPEAKER CORNERS PA/DJ CABINET STACKABLE

Tue, 31 Mar 2009 17:07:44 -0600

This listing is for a set of 16 speaker cabinet corners. You will receive 16 corners pictured and described above. These are heavy duty stackable corners.

Price=$19.98
Buy

Niles® Audio 4-post Wall Outlets for Speaker Wires bone

Tue, 31 Mar 2009 17:07:44 -0600

Niles 5W-2D Decora Faceplate - Wall plate - bone

Tue, 31 Mar 2009 17:07:42 -0600

Penn-Elcom 1519BK Lift-Off Hinge Black

Tue, 31 Mar 2009 17:07:41 -0600

Two-piece, heavy duty lift off hinge. 2-1/4" x 1-7/8". Steel construction with black powdercoat finish. Mfg. #P0625K.
Price=$2.15
Buy

Atlona High-quality Wall Plate for 1 Speaker

Tue, 31 Mar 2009 17:07:40 -0600

NEWA great product for custom applications. If you want to hide your speaker wires in the walls, it would be really hard to not use a wall plate. This wall plate features 24k gold plated binding posts. With this wall plate you can either tie up wires directly to the wall plate or use 4mm (banana) plugs for the rear entry. This wall plate supports 1 speaker. Works with any standard single gang box.
Price=$5.59
Buy

Niles® Audio 4-post Wall Outlets for Speaker Wires white

Tue, 31 Mar 2009 17:07:37 -0600

Dayton DA175-8 7" Aluminum Cone Woofer

Tue, 31 Mar 2009 17:07:37 -0600

7" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. The cosmetic stamped steel frame provides a very high-class and professional look to your next speaker design. The aluminum cone offers a flat frequency response in the passband region with very low distortion. Specifications: *Power handling: 50 watts RMS/75 watts max *VCdia: 1-3/8" *Le: 1.14 mH *Impedance: 8 ohms *Re: 5.9 ohms *Frequency range: 35-10,000 Hz *Fs: 39 Hz *SPL: 85 dB 1W/1m *Vas: .58 cu. ft. *Qms: 3.31 *Qes: .70 *Qts: 0.58 *Xmax 4.25 mm *Dimensions: Overall Diameter: 6-15/16", Cutout Diameter: 5-5/8", Mounting Depth: 3".
Price=$33.99
Buy

Dual Female In HDmi Wall Plate

Tue, 31 Mar 2009 17:07:36 -0600

2 dual (front and rear) female HDMI terminals * 2 internal pigtails for easy hookup * HDMI version 1.3a * UL-CL3 rated for in-wall use * open-backed single-gang J-box or plaster ring required for installation (not included) *
Price=$29.40
Buy

Penn-Elcom H1015 Compact PA Cabinet Handle 6" x 7"

Tue, 31 Mar 2009 17:07:35 -0600

Penn Fabrication...Supplying The Music Industry Since 1974. Compact P.A. handle is ideal for main and monitor cabinets, as well as homemade racks. Constructed of ABS plastic. Dimensions: 5-15/16" H x 6-15/16" W x 2-5/16" D. Cutout: 4-1/2" H x 5-1/2" W. Mfg. #H1015.
Price=$8.90
Buy

Leviton 40804-BA QuickPort Flush Mount Wall Plate, 4-Port, Almond

Tue, 31 Mar 2009 17:07:34 -0600

4-PORT SINGLE GANG QUICKPORT WALLPLATE: The Leviton Quickport 4-Port Flush Mount Wallplate is field-configurable and accepts QuickPort snap-in modules to support multimedia applications with multiple ports. Use this wallplate where a one-piece, single-gang, economical flush-mount housing is desired.
Price=$1.50
Buy

Boston Acoustics Designer VRi595 - Speaker - 3-way

Tue, 31 Mar 2009 17:07:33 -0600

Given the intelligent engineering inside, a designer VRi595 will make its presence known to any set of critical ears in the room. All designer VRi systems are direct descendants of the highly acclaimed Boston reference speaker systems. Every screw, cone, grille, and bevel is designed to facilitate incredible, lifelike sound with a minimum of diffraction (the breaking up of sound by obstructions) and maximum dispersion (widespread sound).Features include a die-cast baffle that adds rigidity and ensures precise alignment of driver components for unparalleled accuracy.VRi595 includes a boundary compensation switch that allows the installer to shape the sound of each speaker to counteract the effect of being installed too close to or too far away from, a listening area?s corner. The VRi speakers have paintable aluminum grilles and are constructed of rugged materials - making them ideal for Hidden Theater installations. The result is optimum sound in a wide range of installation locations.
Price=$800.00
Buy

Audiovox Ap306N Performance Series Gold-Plated Speaker Pins (4)

Tue, 31 Mar 2009 17:07:32 -0600

Acoustic Research Performance Cables provide an exceptional viewing experience. S-Video cable greatly improves the performance of equipment with an S-Video connection. Component cables provide the highest color balance and sharpest, most accurate picture for DVD players with component video outputs and high-end TVs with component video inputs.
Price=$8.65
Buy

HiFi Works 30009 HFWS4 Four-Pair Speaker Selector, Black

Tue, 31 Mar 2009 17:07:31 -0600

Add up to 4 pair of speakers throughout your house and control them all from this handy and compact speaker selector. In-line resistive circuitry protects your receiver from overload due to long lengths of speaker wire and multiple pairs of speakers. Easily select which pairs to listen to with just the push of a button. Combine the HiFi Works S4 speaker selector with the HiFi Works Volume Control for total whole house audio just like those fancy custom systems.
Price=$70.20
Buy

Latex Backed Carpet Black Yard 48" Wide

Tue, 31 Mar 2009 17:07:30 -0600

Latex backing adds extra durability and toughness. Perfect for applications such as stage monitor cabinets where the carpet will take a lot of abuse. Also is a good choice for automotive applications. Sold by the linear yard. 48" wide. Made in the U.S.A.
Price=$5.55
Buy

Dayton PH122 Small Plastic Pocket Handle

Tue, 31 Mar 2009 17:07:29 -0600

An economical and easy-to-install plastic pocket handle, particularly suited to carpeted or vinyl-covered enclosures. The one-piece design and durable ABS material provide good looks and an airtight seal. Dimensions: 5-5/16" W x 3-1/2" H x 3-1/8" D. Cutout dimensions: 3-7/8" W x 2-1/4" H. Dayton Audio professional speaker cabinet and case hardware is designed and produced to get the job done, night after night, gig after gig. Each product is built to last from the highest quality materials, and is engineered for reliability and performance. Choose the same products that leading manufacturers and audio professionals around the world already use. Dayton Audio...superb performance at a great price!
Price=$1.99
Buy

8" Waffle Type Speaker Grill

Tue, 31 Mar 2009 17:07:26 -0600

Value priced grills are made of .7 mm thick medium duty steel mesh. Rubber edges reduce vibration and facilitate mounting. Sold individually. Mounting kits sold separately below.
Price=$2.69
Buy

Atlona High-quality Wall Plate for 4 Speakers

Tue, 31 Mar 2009 17:07:26 -0600

NEWA great product for custom applications. If you want to hide your speaker wires in the walls, it would be really hard to not use a wall plate. This wall plate features 24k gold plated binding posts. With this wall plate you can either tie up wires directly to the wall plate or use 4mm (banana) plugs for the rear entry. This wall plate supports 4 speakers. Compatible with any single gang box.
Price=$13.99
Buy

Goldwood GM-85/8 5" Heavy Duty Sealed Back Midrange 8 Ohm

Tue, 31 Mar 2009 17:07:26 -0600

Sealed back midrange eliminates need for separate midrange enclosure. Features poly-mica cone, treated foam surround, and aluminum voice coil for higher power handling. *Power handling: 40 watts RMS/55 watts max *Voice coil diameter: 1" *Impedance: 8 ohms *Frequency response: 800-8,000 Hz *Fs: 470 Hz *SPL: 89 dB 1W/1m *Dimensions: Overall Diameter: 5-1/8", Cutout Diameter: 4-1/8", Mounting Depth: 2-1/2", Magnet Diameter: 3-1/8", Magnet Height: 3/4".
Price=$9.33
Buy

Cabinet Carpet Jet Black Yard 54" Wide

Tue, 31 Mar 2009 17:07:25 -0600

Now you can cover your custom car and stage cabinets just like the pros. Carpet-like covering is easily cut and glued to plywood, particle board, etc. Provides protection and good looks. Sold by the linear yard. Jet black color, 54" wide.
Price=$4.78
Buy

Cables To Go Premise Plus 3 port Keystone SG Wall Plate White ( 03412 )

Tue, 31 Mar 2009 17:07:24 -0600

Cables To Go's flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system. Write-on designation labels with holders are provided for identifying different systems or stations.
Price=$8.52
Buy

6-1/2" Diameter 2-Pc Mesh Speaker Grill - Black

Tue, 31 Mar 2009 17:07:23 -0600

Convenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Sold individually. Heavy duty expanded steel mesh design. Grill fits 6-1/2" speaker with a maximum outer diameter of 6-7/8". Bolt circle for mounting screws: 6-5/16" Overall diameter: 7".
Price=$4.95
Buy

10" Waffle Type Speaker Grill

Tue, 31 Mar 2009 17:07:23 -0600

Value priced grills are made of .7 mm thick medium duty steel mesh. Rubber edges reduce vibration and facilitate mounting. Sold individually. Mounting kits sold separately below.
Price=$3.80
Buy

Leviton 41106-RW6 QuickPort Cat5 6-Conductor Insert Connector, White

Tue, 31 Mar 2009 17:07:23 -0600

position, 8-conductor Category 5 QuickPort Snap-In Connectors feature dual-color-coded wiring labels with both T568A and T568B wiring patterns, for dual flexibility in a single connector, plus fast, accurate 110 termination of station wiring. Available in 9 colors. Meet standards for UL, NEC Article 800, and FCC Part 68, and fully compliant with published TIA-568-A requirements
Price=$0.99
Buy

Goldwood GW-215/8 15" OEM Woofer 8 Ohm

Tue, 31 Mar 2009 17:07:22 -0600

These low frequency OEM drivers are ideal for the customer who is looking for inexpensive replacement woofers. Each woofer features a treated paper ribbed cone, vented pole piece, moisture resistant poly foam surround, and stamped steel frame. Specifications:*Power handling: 135 watts RMS/250 watts max *Voice coil diameter: 1-1/2" *Le: .9 mH *Re: 7.1 ohms *Frequency response: 27-1,200 Hz *Magnet weight: 20 oz. *Fs: 29 Hz *SPL: 87.8 dB 1W/1m *Vas: 12.95 cu. ft. *Qms: 7.08 *Qes: 2.69 *Qts: 1.95 *Xmax: 3.5mm *Net weight: 5 lbs.
Price=$35.83
Buy

Mtx 12 in 2 Way PA Cabinet

Tue, 31 Mar 2009 17:07:21 -0600

Price=$130.00
Buy

Pioneer B20GR30-51F 8" Butyl Surround Woofer

Tue, 31 Mar 2009 17:07:18 -0600

Power handling: 80 watts RMS/115 watts max * Voice coil diameter: 2" * Impedance: 8 ohms * Frequency response: 31-7,000 Hz * Magnet weight: 30 oz.. * SPL: 91 dB 1W/1m * Vas: 2.44 cu. ft. * Xmax: 2.8mm * Qms: 6.51 * Qes: .27 * Qts: .26 * Fs: 31 Hz * Net weight: 7 lbs. * Manufacturer model number: B20GR30-51F-Q * Dimensions: Overall Diameter: 8-1/8", Cutout Diameter: 7-1/4", Mounting Depth: 4-3/8", Magnet Diameter: 4-3/4", Magnet Height: 1-1/2".
Price=$43.27
Buy

PROCO WP2023 (4) 1/4" TRS JACK WALLPLATE DUAL GANG

Tue, 31 Mar 2009 17:07:18 -0600

Dayton HDSG-12 Heavy Duty 12" Speaker Grill

Tue, 31 Mar 2009 17:07:17 -0600

Provide your expensive speakers with the best protection. Dayton Professional HDSG Series 12" grills are the ultimate defense against feet, mic stands, and flying bottles. Powder coated 1.2 mm steel is punched, shaped, and trimmed with a vibration-dampening vinyl trim ring, ensuring years of service. Easily attach with accessory clamp kit, sold separately.
Price=$14.99
Buy

Niles® Audio 8-post Wall Outlets for Speaker Wires Bone

Tue, 31 Mar 2009 17:07:16 -0600

eight dual (front and rear) 5-way binding posts * gold-plated terminals * fits standard single-gang junction box * accepts banana connectors, pin connectors, spade connectors or bare wires * bone finish *
Price=$32.99
Buy

Boston Acoustics - VRi585T2

Tue, 31 Mar 2009 17:07:15 -0600

8" DCD in ceiling dual voice coil (sold individually)
Price=$500.00
Buy

Dayton DC160S-8 6-1/2" Classic Shielded Woofer

Tue, 31 Mar 2009 17:07:14 -0600

Perfect for audio/video use. Features paper cone, treated cloth dustcap and butyl rubber surround. Specifications: * Power handling: 50 watts RMS/75 watts max * Voice coil diameter: 1-3/8" * Le: 1.54 mH * Impedance: 8 ohms * DC resistance: 6.6 ohms * Frequency response: 33-4,000 Hz * Magnet weight: 15 oz. * Fs: 32 Hz * SPL: 87 dB 1W/1m * Vas: .87 cu. ft. * Qms: 2.91 * Qes: .32 * Qts: .29 * Xmax: 3.15mm * Dimensions: Overall Diameter: 6-1/2", Cutout Diameter: 5-3/4", Mounting Depth: 3-1/2", Magnet Diameter: 4-1/2", Magnet Height: 2".
Price=$30.99
Buy

Eminence LA6-CBMR 6-1/2" Sealed Back Mid Line Array Series

Tue, 31 Mar 2009 17:07:13 -0600

Recommended for professional audio midrange from 500 Hz-3 kHz. Basket is closed. The truncated basket is designed to minimize acoustical center spacing and modeling specific to line arrays. *Power handling: 150 watts RMS *VCdia: 1.5" *Le: 0.33 mH *Impedance: 8 ohms *Re: 6.3 ohms *Frequency range: 500-5,400 Hz *Magnet weight: 38 oz. *Fs: 460 Hz *SPL: 97.8 dB *Vas: 0.01 cu. ft. *Qms: 3.13 *Qes: 1.24 *Qts: 0.89 *Xmax: 0.2 mm *Dimensions: Overall diameter: 6.59"; Width across flats: 6"; Baffle hole diameter: 5.65"; Depth: 2.77".
Price=$54.99
Buy

6" Waffle Type Speaker Grill

Tue, 31 Mar 2009 17:07:12 -0600

Value priced grills are made of .7 mm thick medium duty steel mesh. Rubber edges reduce vibration and facilitate mounting. Sold individually. Mounting kits sold separately below. Actual grill diameter: 6-11/16".
Price=$2.58
Buy

Penn-Elcom L905/915K Butterfly Latch Black

Tue, 31 Mar 2009 17:07:11 -0600

On-Q/Legrand AnyPort White RCA to "F" Insert, White

Tue, 31 Mar 2009 17:07:09 -0600

Supports distribution of home audio, home theater audio, and video. This high quality anyport insert is for use in all AnyPort Wall Plates.
Price=$3.86
Buy

Dayton WT3 Woofer Tester

Tue, 31 Mar 2009 17:07:06 -0600

Dayton Audio's WT3 makes measuring loudspeaker driver parameters easier, faster and more accurate than ever before. While previous generation woofer testers took around 6 minutes to measure 30 impedance points, the new WT3 measures over 30,000 data points in just a few seconds using a new swept sine technique that is only available with the WT3. The result is a very high-resolution impedance measurement that allows the extraction of an extremely accurate driver parameter set, suitable for the most critical loudspeaker design work. Free air parameters are measured in just a few seconds. VAS can be measured by traditional test box, added mass or, more conveniently, just by specifying the 1W/1m SPL of the driver. No other loudspeaker impedance tester is as fast, versatile, or as easy to use as the WT3. WT3 hardware consists of a compact USB interface unit with attached USB cable and alligator clip leads. It's manufactured on state-of-the-art equipment using precision surface mount components. Windows compatible software provides an easy-to-use interface that allows you to be up and running very quickly. You can save as many as 20 impedance measurements per project and then overlay and compare any or all of the measurements to create a custom report complete with all your notes. Perfect for quick incoming QC inspections. For Updates Visit http://www.daytonaudio.com/wt3updates.html
Price=$149.99
Buy

Pioneer A11EC80-02F 4-1/2" Full Range Driver

Tue, 31 Mar 2009 17:07:05 -0600

Paper cone with treated cloth surround. Open back and stamped basket. Perfect for bookshelf type speakers and car stereo installations. * Power handling: 20 watts RMS/30 watts max * Voice coil diameter: 1" * Impedance: 8 ohms * Frequency response: 70-15,000 Hz * Magnet weight: 9.3 oz. * Fs: 70 Hz * SPL: 90 dB 1W/1m * Vas: .31 cu. ft. * Xmax: 1.1mm * Qms: 1.40 * Qes: .47 * Qts: .35 * Net weight: 2 lbs. * Manufacturer model number: A11EC80-02F * Dimensions: Overall Diameter: 4-1/2", Cutout Diameter: 4-1/8", Mounting Depth: 2-3/8", Magnet Diameter: 3-1/8", Magnet Height: 1".
Price=$13.98
Buy

Leviton 41642-B QuickPort Decora Wall Plate Insert, 2-Port, Brown

Tue, 31 Mar 2009 17:07:04 -0600

QUICKPORT DECORA MULTIMEDIA INSERTS: Combine voice, data, audio and video in one compact, attractive Leviton Decora Quickport 2-Port Wallplate Insert. This Wallplate Insert offers designer style to match Leviton Decora electrical switches and outlets, with capacity and flexibility to support high-tech communications for boardrooms or workstations. QuickPort snap-in modules fit neatly into a single gang Decora wallplate and can be combined with other Decora devices (with a barrier box) in a multi-gang wallplate.
Price=$3.95
Buy

Cables To Go - 40855 - RapidRun Digital HDMI Active Wall Plate

Tue, 31 Mar 2009 17:07:03 -0600

The RapidRun-Digital connector is designed and crafted for ultimate performance, every detail works to make the system virtually transparent to the delicate digital signal! Like RapidRun, RapidRun-Digital is centered on the Runner cable. Installations are easier than with traditional HDMI or DVI cables because the RapidRun-Digital Runner fits through ?-inch conduit, even with a 90-degree sweep!Termination is fast and simple; just attach the appropriate Break-Away Wall Plate or Flying Lead to the Runner. Want more? Add a choice of passive or active wall plates to ensure performance with a wide range of products and installations.RapidRun-Digital crushes standard HDMI and DVI length limitations with dependable performance to more than 65 feet, even at 1080p resolution! The RapidRun Digital Active Wall Plate is the first HDMI/DVI wall plate solution with an integrated equalizer/extender. The extender corrects for attenuation and impedance so that the signal can be transmitted over a runner cable as long as 65 feet. A Flying Lead or passive RapidRun-Digital Wall Plate with a standard HDMI or DVI interconnector terminates the runner cable.
Price=$89.90
Buy